We use cookies essential for this site to function well. Please click to help us improve its usefulness with additional cookies. Learn about our use of cookies in our Privacy Policy & Cookies Policy.

Show details

XGBoost Parameters Tuning: A Complete Guide with Python Codes

Aarshay 30 Sep, 2024
15 min read

Introduction

If things don’t go your way in predictive modeling, use XGboost. XGBoost algorithm has become the ultimate weapon of many data scientists. It’s a highly sophisticated algorithm, powerful enough to deal with all sorts of irregularities of data. It uses parallel computation in which multiple decision trees are trained in parallel to find the final prediction. This article is best suited to people who are new to XGBoost. We’ll learn the art of XGBoost parameters tuning and XGBoost hyperparameter tuning. Also, we’ll practice this algorithm using a training data set in Python. With that you will get insights about the xgbclassifier parameters, and xgboost hyperparamters so in this article we have cover all the topic related xgbclassifier parameters in python.

In this article, you will learn about the XGBoost algorithm, including how the XGBoost classifier functions and the intricacies of the XGBoost model. We will provide a clear explanation of the XGBoost algorithm, detailing how XGBoost works to improve predictive performance in machine learning tasks.

What is XGBoost?

XGBoost classifier simplifies machine learning model creation, but enhancing performance can be challenging due to the complexity of parameter tuning. Choosing the right parameters and determining ideal values for these parameters is crucial for optimal output. This process becomes complex when determining which parameters to focus on and assign values, making it essential to obtain practical answers to ensure the best possible output for the XGBoost model.

XGBoost is a popular gradient boosting algorithm known for its high performance and efficiency in machine learning tasks. Its extensive set of parameters is useful for those familiar with Gradient Boosting Machine (GBM). A comprehensive guide to parameter tuning in GBM in Python is recommended, as it enhances understanding of boosting techniques and prepares for a more nuanced comprehension of naturally available XGBoost parameters.

HR analytics is revolutionizing the way human resources departments operate, leading to higher efficiency and better results. Despite years of using analytics, manual data collection and analysis have been constraining HR. Machine learning has emerged as a useful tool, and predictive analytics can help identify employees most likely to be promoted. HR departments should practice using XGBoost to improve their operations and improve overall results.

Advantages of XGBoost

I’ve always admired the boosting capabilities that the XGBoost parameters algorithm infuses into a predictive model. When I explored more about its performance and the science behind its high accuracy, I discovered many advantages, including the flexibility and power of its parameters :

Regularization

Standard GBM implementation has no regularization like XGBoost; therefore, it also helps to reduce overfitting. In fact, XGBoost is also known as a ‘regularized boosting‘ technique.

Parallel Processing

XGBoost implements parallel processing and is faster as compared to GBM.

But hang on, we know that boosting is a sequential process so how can it be parallelized? We know that each tree can be built only after the previous one, so what stops us from making a tree using all cores? I hope you get where I’m coming from. Check this link out to explore further. XGBoost also supports implementation on Hadoop.

High Flexibility

XGBoost allows users to define custom optimization objectives and evaluation criteria. This adds a whole new dimension to the model and there is no limit to what we can do.

Handling Missing Values

XGBoost has an in-built routine to handle missing values. The user is required to supply a different value than other observations and pass that as a parameter. XGBoost tries different things as it encounters a missing value on each node and learns which path to take for missing values in the future.

Tree Pruning

A GBM would stop splitting a node when it encounters a negative loss in the split. Thus it is more of a greedy algorithm. XGBoost parameters, on the other hand, makes splits up to the max_depth specified and then starts pruning the tree backward and removing splits beyond which there is no positive gain.

Another advantage is that sometimes a split of negative loss, say -2, may be followed by a split of positive loss +10. GBM would stop as it encounters -2. But XGBoost will go deeper, and it will see a combined effect of +8 of the split and keep both.

Built-in Cross-Validation

XGBoost allows the user to run a cross-validation at each iteration of the boosting process and thus, it is easy to get the exact optimum number of boosting iterations in a single run. This is unlike GBM, where we have to run a grid search, and only limited values can be tested.

Continue on the Existing Model

Users can start training an XGBoost parameters model from its last iteration of the previous run. This can be of significant advantage in certain specific applications. GBM implementation of sklearn also has this feature, so they are even on this point.

I hope now you understand the sheer power XGBoost algorithm. Note that these are the points that I could muster. Do you know a few more? Feel free to drop a comment below, and I will update the list.

What are XGBoost Parameters?

The overall parameters have been divided into 3 categories by XGBoost authors:

  • General Parameters: Guide the overall functioning
  • Booster Parameters: Guide the individual booster (tree/regression) at each step
  • Learning Task Parameters: Guide the optimization performed

Must Read: Complete Machine Learning Guide to Parameter Tuning in Gradient Boosting (GBM) in Python

General Parameters

These define the overall functionality of XGBoost.

  • booster [default=gbtree]
    • Select the type of model to run at each iteration. It has 2 options:
      • gbtree: tree-based models
      • gblinear: linear models
  • silent [default=0]
    • Silent mode is activated is set to 1, i.e., no running messages will be printed.
    • It’s generally good to keep it 0 as the messages might help in understanding the model.
  • nthread [default to the maximum number of threads available if not set]
    • This is used for parallel processing, and the number of cores in the system should be entered
    • If you wish to run on all cores, the value should not be entered, and the algorithm will detect it automatically

There are 2 more parameters that are set automatically by XGBoost, and you need not worry about them. Let’s move on to Booster parameters.

Booster Parameters

Though there are 2 types of boosters, I’ll consider only tree booster here because it always outperforms the linear booster, and thus the latter is rarely used.

ParameterDescriptionTypical Values
etaAnalogous to the learning rate in GBM.0.01-0.2
min_child_weightDefines the minimum sum of weights of observations required in a child.Tuned using CV
max_depthThe maximum depth of a tree. Used to control over-fitting.3-10
max_leaf_nodesThe maximum number of terminal nodes or leaves in a tree.
gammaSpecifies the minimum loss reduction required to make a split.Tuned depending on loss function
max_delta_stepAllows each tree’s weight estimation to be constrained.Usually not needed, explore if necessary
subsampleDenotes the fraction of observations to be random samples for each tree.0.5-1
colsample_bytreeDenotes the fraction of columns to be random samples for each tree.0.5-1
colsample_bylevelDenotes the subsample ratio of columns for each split in each level.Usually not used
lambdaL2 regularization term on weights (analogous to Ridge regression).Explore for reducing overfitting
alphaL1 regularization term on weight (analogous to Lasso regression).Used for high dimensionality
scale_pos_weightUsed in case of high-class imbalance for faster convergence.> 0

Learning Task Parameters

These parameters are used to define the optimization objective and the metric to be calculated at each step.

  • objective [default=reg:linear]
    • This defines the loss function to be minimized. Mostly used values are:
      • binary: logistic –logistic regression for binary classification returns predicted probability (not class)
      • multi: softmax –multiclass classification using the softmax objective, returns predicted class (not probabilities)
        • you also need to set an additional num_class (number of classes) parameter defining the number of unique classes
      • multi: softprob –same as softmax, but returns predicted probability of each data point belonging to each class.
  • eval_metric [ default according to objective ]
    • The evaluation metrics are to be used for validation data.
    • The default values are rmse for regression and error for classification.
    • Typical values are:
      • rmse – root mean square error
      • mae – mean absolute error
      • logloss – negative log-likelihood
      • error – Binary classification error rate (0.5 thresholds)
      • merror – Multiclass classification error rate
      • mlogloss – Multiclass logloss
      • auc: Area under the curve
  • seed [default=0]
    • The random number seed.
    • It can be used for generating reproducible results and also for parameter tuning.

If you’ve been using Scikit-Learn till now, these parameter names might not look familiar. The good news is that the xgboost module in python has an sklearn wrapper called XGBClassifier parameters. It uses the sklearn style naming convention. The parameters names that will change are:

  • eta –> learning_rate
  • lambda –> reg_lambda
  • alpha –> reg_alpha

You must be wondering why we have defined everything except something similar to the “n_estimators” parameter in GBM. Well, this exists as a parameter in XGBClassifier. However, it has to be passed as “num_boosting_rounds” while calling the fit function in the standard xgboost implementation.

Go through the following parts of the xgboost guide to better understand the parameters and codes:

XGBoost Parameters Tuning With Example

We will take the data set from Data Hackathon 3. x AV hackathon, as taken in the GBM article. The details of the problem can be found on the competition page. You can download the data set from here. I have performed the following steps:

  • The city variable dropped because of too many categories.
  • DOB converted to Age | DOB dropped.
  • EMI_Loan_Submitted_Missing created, which is 1 if EMI_Loan_Submitted was missing; else 0 | Original variable EMI_Loan_Submitted dropped.
  • EmployerName dropped because of too many categories.
  • Existing_EMI imputed with 0 (median) since only 111 values were missing.
  • Interest_Rate_Missing created, which is 1 if Interest_Rate was missing; else 0 | Original variable Interest_Rate dropped.
  • Lead_Creation_Date dropped because it made a little intuitive impact on the outcome.
  • Loan_Amount_Applied, Loan_Tenure_Applied imputed with median values.
  • Loan_Amount_Submitted_Missing created, which is 1 if Loan_Amount_Submitted was missing; else 0 | Original variable Loan_Amount_Submitted dropped.
  • Loan_Tenure_Submitted_Missing created, which is 1 if Loan_Tenure_Submitted was missing; else 0 | Original variable Loan_Tenure_Submitted dropped.
  • LoggedIn, Salary_Account dropped.
  • Processing_Fee_Missing created, which is 1 if Processing_Fee was missing; else 0 | Original variable Processing_Fee dropped.
  • Source – top 2 kept as is, and all others are combined into a different category.
  • Numerical and One-Hot-Coding performed.

For those who have the original data from the competition, you can check out these steps from the data_preparation iPython notebook in the repository.

Let’s start by importing the required libraries and loading the data.

Python Code

#Import libraries:
import pandas as pd
import numpy as np
import xgboost as xgb
from xgboost.sklearn import XGBClassifier
from sklearn import metrics   #Additional scklearn functions
from sklearn.model_selection import GridSearchCV
import matplotlib.pylab as plt

from matplotlib.pylab import rcParams
rcParams['figure.figsize'] = 12, 4

train = pd.read_csv('Train_Modified.csv', encoding='ISO-8859–1')
target = 'Disbursed'
IDcol = 'ID'

print("There will be no output for this particular block of code")

Note: that I have imported 2 forms of XGBoost:

  • xgb – this is the direct xgboost library. I will use a specific function, “cv” from this library
  • XGBClassifier – this is an sklearn wrapper for XGBoost. This allows us to use sklearn’s Grid Search with parallel processing in the same way we did for GBM.

Before proceeding further, let’s define a function that will help us create XGBoost models and perform cross-validation. The best part is that you can take this function as it is and use it later for your own models.

def modelfit(alg, dtrain, predictors,useTrainCV=True, cv_folds=5, early_stopping_rounds=50):
    
    if useTrainCV:
        xgb_param = alg.get_xgb_params()
        xgtrain = xgb.DMatrix(dtrain[predictors].values, label=dtrain[target].values)
        cvresult = xgb.cv(xgb_param, xgtrain, num_boost_round=alg.get_params()['n_estimators'], nfold=cv_folds,
            metrics='auc', early_stopping_rounds=early_stopping_rounds, show_progress=False)
        alg.set_params(n_estimators=cvresult.shape[0])
    
    #Fit the algorithm on the data
    alg.fit(dtrain[predictors], dtrain['Disbursed'],eval_metric='auc')
        
    #Predict training set:
    dtrain_predictions = alg.predict(dtrain[predictors])
    dtrain_predprob = alg.predict_proba(dtrain[predictors])[:,1]
        
    #Print model report:
    print "\nModel Report"
    print "Accuracy : %.4g" % metrics.accuracy_score(dtrain['Disbursed'].values, dtrain_predictions)
    print "AUC Score (Train): %f" % metrics.roc_auc_score(dtrain['Disbursed'], dtrain_predprob)
                    
    feat_imp = pd.Series(alg.booster().get_fscore()).sort_values(ascending=False)
    feat_imp.plot(kind='bar', title='Feature Importances')
    plt.ylabel('Feature Importance Score')

This code is slightly different from what I used for GBM. The focus of this article is to cover the concepts and not coding. Please feel free to drop a note in the comments if you find any challenges in understanding any part of it. Note that xgboost’s sklearn wrapper doesn’t have a “feature_importances” metric but a get_fscore() function, which does the same job.

General Approach for XGBoost Parameters Tuning

We will use an approach similar to that of GBM here. The various steps to be performed are:

  • Choose a relatively high learning rate. Generally, a learning rate of 0.1 works, but somewhere between 0.05 to 0.3 should work for different problems. Determine the optimum number of trees for this learning rate. XGBoost has a very useful function called “cv” which performs cross-validation at each boosting iteration and thus returns the optimum number of trees required.
  • Tune tree-specific parameters ( max_depth, min_child_weight, gamma, subsample, colsample_bytree) for the decided learning rate and the number of trees. Note that we can choose different parameters to define a tree, and I’ll take up an example here.
  • Tune regularization parameters (lambda, alpha) for xgboost, which can help reduce model complexity and enhance performance.
  • Lower the learning rate and decide the optimal parameters.

Let us look at a more detailed step-by-step approach.

Step 1: Fix Learning Rate and Number of Estimators for Tuning Tree-Based Parameters.

In order to decide on boosting parameters, we need to set some initial values of other parameters. Let’s take the following values:

  • max_depth = 5: This should be between 3-10. I’ve started with 5, but you can choose a different number as well. 4-6 can be good starting points.
  • min_child_weight = 1: A smaller value is chosen because it is a highly imbalanced class problem, and leaf nodes can have smaller size groups.
  • gamma = 0: A smaller value like 0.1-0.2 can also be chosen for starting. This will, anyways, be tuned later.
  • subsample, colsample_bytree = 0.8: This is a commonly used start value. Typical values range between 0.5-0.9.
  • scale_pos_weight = 1: Because of high-class imbalance.

Please note that all the above are just initial estimates and will be tuned later. Let’s take the default learning rate of 0.1 here and check the optimum number of trees using the cv function of xgboost. The function defined above will do it for us.

#Choose all predictors except target & IDcols
predictors = [x for x in train.columns if x not in [target, IDcol]]
xgb1 = XGBClassifier(
 learning_rate =0.1,
 n_estimators=1000,
 max_depth=5,
 min_child_weight=1,
 gamma=0,
 subsample=0.8,
 colsample_bytree=0.8,
 objective= 'binary:logistic',
 nthread=4,
 scale_pos_weight=1,
 seed=27)
modelfit(xgb1, train, predictors)

As you can see that here we got 140 as the optimal estimator for a 0.1 learning rate. Note that this value might be too high for you depending on your system’s power. In that case, you can increase the learning rate and re-run the command to get the reduced number of estimators.

Note: You will see the test AUC as “AUC Score (Test)” in the outputs here. But this would not appear if you try to run the command on your system as the data is not made public. It’s provided here just for reference. The part of the code which generates this output has been removed here.

Step2: Tune max_depth and min_child_weight

We tune these first as they will have the highest impact on the model outcome. To start with, let’s set wider ranges, and then we will perform another iteration for smaller ranges.

Important Note: I’ll be doing some heavy-duty grid searches in this section, which can take 15-30 mins or even more time to run, depending on your system. You can vary the number of values you are testing based on what your system can handle.

param_test1 = {
 'max_depth':range(3,10,2),
 'min_child_weight':range(1,6,2)
}
gsearch1 = GridSearchCV(estimator = XGBClassifier( learning_rate =0.1, n_estimators=140, max_depth=5,
 min_child_weight=1, gamma=0, subsample=0.8, colsample_bytree=0.8,
 objective= 'binary:logistic', nthread=4, scale_pos_weight=1, seed=27), 
 param_grid = param_test1, scoring='roc_auc',n_jobs=4,iid=False, cv=5)
gsearch1.fit(train[predictors],train[target])
gsearch1.grid_scores_, gsearch1.best_params_, gsearch1.best_score_
XGBoost, parameter tuning, python

Here, we have run 12 combinations with wider intervals between values. The ideal values are 5 for max_depth and 5 for min_child_weight. Let’s go one step deeper and look for optimum values. We’ll search for values 1 above and below the optimum values because we took an interval of two.

param_test2 = {
 'max_depth':[4,5,6],
 'min_child_weight':[4,5,6]
}
gsearch2 = GridSearchCV(estimator = XGBClassifier( learning_rate=0.1, n_estimators=140, max_depth=5,
 min_child_weight=2, gamma=0, subsample=0.8, colsample_bytree=0.8,
 objective= 'binary:logistic', nthread=4, scale_pos_weight=1,seed=27), 
 param_grid = param_test2, scoring='roc_auc',n_jobs=4,iid=False, cv=5)
gsearch2.fit(train[predictors],train[target])
gsearch2.grid_scores_, gsearch2.best_params_, gsearch2.best_score_

Here, we get the optimum values as 4 for max_depth and 6 for min_child_weight. Also, we can see the CV score increasing slightly. Note that as the model performance increases, it becomes exponentially difficult to achieve even marginal gains in performance. You would have noticed that here we got 6 as the optimum value for min_child_weight, but we haven’t tried values more than 6. We can do that as follow:

param_test2b = {
 'min_child_weight':[6,8,10,12]
}
gsearch2b = GridSearchCV(estimator = XGBClassifier( learning_rate=0.1, n_estimators=140, max_depth=4,
 min_child_weight=2, gamma=0, subsample=0.8, colsample_bytree=0.8,
 objective= 'binary:logistic', nthread=4, scale_pos_weight=1,seed=27), 
 param_grid = param_test2b, scoring='roc_auc',n_jobs=4,iid=False, cv=5)
gsearch2b.fit(train[predictors],train[target])
modelfit(gsearch3.best_estimator_, train, predictors)
gsearch2b.grid_scores_, gsearch2b.best_params_, gsearch2b.best_score_
xgboost, parameter tuning

We see 6 as the optimal value.

Step3: Tune gamma

Now let’s tune the gamma value using the parameters already tuned above. Gamma can take various values, but I’ll check for 5 values here. You can go into more precise values.

param_test3 = {
 'gamma':[i/10.0 for i in range(0,5)]
}
gsearch3 = GridSearchCV(estimator = XGBClassifier( learning_rate =0.1, n_estimators=140, max_depth=4,
 min_child_weight=6, gamma=0, subsample=0.8, colsample_bytree=0.8,
 objective= 'binary:logistic', nthread=4, scale_pos_weight=1,seed=27), 
 param_grid = param_test3, scoring='roc_auc',n_jobs=4,iid=False, cv=5)
gsearch3.fit(train[predictors],train[target])
gsearch3.grid_scores_, gsearch3.best_params_, gsearch3.best_score_
parameter tuning, gamma

This shows that our original value of gamma, i.e., 0 is the optimum one. Before proceeding, a good idea would be to re-calibrate the number of boosting rounds for the updated parameters.

xgb2 = XGBClassifier(
 learning_rate =0.1,
 n_estimators=1000,
 max_depth=4,
 min_child_weight=6,
 gamma=0,
 subsample=0.8,
 colsample_bytree=0.8,
 objective= 'binary:logistic',
 nthread=4,
 scale_pos_weight=1,
 seed=27)
modelfit(xgb2, train, predictors)

Here, We can see the score improvement. so, the final parameters are:

  • max_depth: 4
  • min_child_weight: 6
  • gamma: 0

Step4: Tune subsample and colsample_bytree

The next step would be to try different subsample and colsample_bytree values. Let’s do this in 2 stages as well and take values 0.6,0.7,0.8,0.9 for both to start with.

param_test4 = {
 'subsample':[i/10.0 for i in range(6,10)],
 'colsample_bytree':[i/10.0 for i in range(6,10)]
}
gsearch4 = GridSearchCV(estimator = XGBClassifier( learning_rate =0.1, n_estimators=177, max_depth=4,
 min_child_weight=6, gamma=0, subsample=0.8, colsample_bytree=0.8,
 objective= 'binary:logistic', nthread=4, scale_pos_weight=1,seed=27), 
 param_grid = param_test4, scoring='roc_auc',n_jobs=4,iid=False, cv=5)
gsearch4.fit(train[predictors],train[target])
gsearch4.grid_scores_, gsearch4.best_params_, gsearch4.best_score_
tuning

Here, we found 0.8 as the optimum value for both subsample and colsample_bytree. Now we should try values in 0.05 intervals around these.

param_test5 = {
 'subsample':[i/100.0 for i in range(75,90,5)],
 'colsample_bytree':[i/100.0 for i in range(75,90,5)]
}
gsearch5 = GridSearchCV(estimator = XGBClassifier( learning_rate =0.1, n_estimators=177, max_depth=4,
 min_child_weight=6, gamma=0, subsample=0.8, colsample_bytree=0.8,
 objective= 'binary:logistic', nthread=4, scale_pos_weight=1,seed=27), 
 param_grid = param_test5, scoring='roc_auc',n_jobs=4,iid=False, cv=5)
gsearch5.fit(train[predictors],train[target])
tuning

Again we got the same values as before. Thus the optimum values are:

  • subsample: 0.8
  • colsample_bytree: 0.8

Step5: Tuning Regularization Parameters

The next step is to apply regularization to reduce overfitting. However, many people don’t use this parameter much as gamma provides a substantial way of controlling complexity. But we should always try it. I’ll tune the ‘reg_alpha’ value here and leave it up to you to try different values of ‘reg_lambda’.

param_test6 = {
 'reg_alpha':[1e-5, 1e-2, 0.1, 1, 100]
}
gsearch6 = GridSearchCV(estimator = XGBClassifier( learning_rate =0.1, n_estimators=177, max_depth=4,
 min_child_weight=6, gamma=0.1, subsample=0.8, colsample_bytree=0.8,
 objective= 'binary:logistic', nthread=4, scale_pos_weight=1,seed=27), 
 param_grid = param_test6, scoring='roc_auc',n_jobs=4,iid=False, cv=5)
gsearch6.fit(train[predictors],train[target])
gsearch6.grid_scores_, gsearch6.best_params_, gsearch6.best_score_
tuning, regularization parameters

We can see that the CV score is less than in the previous case. But the values tried are very widespread. We should try values closer to the optimum here (0.01) to see if we get something better.

param_test7 = {
 'reg_alpha':[0, 0.001, 0.005, 0.01, 0.05]
}
gsearch7 = GridSearchCV(estimator = XGBClassifier( learning_rate =0.1, n_estimators=177, max_depth=4,
 min_child_weight=6, gamma=0.1, subsample=0.8, colsample_bytree=0.8,
 objective= 'binary:logistic', nthread=4, scale_pos_weight=1,seed=27), 
 param_grid = param_test7, scoring='roc_auc',n_jobs=4,iid=False, cv=5)
gsearch7.fit(train[predictors],train[target])
gsearch7.grid_scores_, gsearch7.best_params_, gsearch7.best_score_
tuning, regularization parameters

You can see that we got a better CV. Now we can apply this regularization in the model and look at the impact:

xgb3 = XGBClassifier(
 learning_rate =0.1,
 n_estimators=1000,
 max_depth=4,
 min_child_weight=6,
 gamma=0,
 subsample=0.8,
 colsample_bytree=0.8,
 reg_alpha=0.005,
 objective= 'binary:logistic',
 nthread=4,
 scale_pos_weight=1,
 seed=27)
modelfit(xgb3, train, predictors)

Again we can see a slight improvement in the score.

Step6: Reducing the Learning Rate

Lastly, we should lower the learning rate and add more trees. Let’s use the cv function of XGBoost classifier to do the job again.

xgb4 = XGBClassifier(
 learning_rate =0.01,
 n_estimators=5000,
 max_depth=4,
 min_child_weight=6,
 gamma=0,
 subsample=0.8,
 colsample_bytree=0.8,
 reg_alpha=0.005,
 objective= 'binary:logistic',
 nthread=4,
 scale_pos_weight=1,
 seed=27)
modelfit(xgb4, train, predictors)

Here is a live coding window where you can try different parameters and test the results.


import pandas as pd
import numpy as np
import xgboost as xgb
from xgboost.sklearn import XGBClassifier
from sklearn.model_selection import cross_val_score
from sklearn import metrics
from sklearn.model_selection import GridSearchCV

train = pd.read_csv('train_modified_sample.csv')
print(train.head())

print(train['Disbursed'].value_counts())


target='Disbursed'
IDcol = 'ID'

predictors = [x for x in train.columns if x not in [target, IDcol]]

param_test = {
    'reg_alpha':[1e-5, 1e-2, 0.1, 100]
}
gsearch = GridSearchCV(estimator = 
XGBClassifier(learning_rate =0.1,
              n_estimators=10,
              max_depth=5,
              min_child_weight=2,
              gamma=0.1,
              subsample=0.85,
              colsample_bytree=0.8,
              objective= 'binary:logistic',
              nthread=4,
              scale_pos_weight=1,
              seed=27), 
              param_grid = param_test,
              scoring='roc_auc',
              n_jobs=4,
              iid=False, 
              cv=2,
              verbose=10)

gsearch.fit(train[predictors],train[target])

print('Best Grid Search Parameters :',gsearch.best_params_)
print('Best Grid Search Score : ',gsearch.best_score_)

Now we can see a significant boost in performance, and the effect of parameter tuning is clearer.

As we come to an end, I would like to share 2 key thoughts:

  • It is difficult to get a very big leap in performance by just using parameter tuning or slightly better models. The max score for GBM was 0.8487, while XGBoost gave 0.8494. This is a decent improvement but not something very substantial.
  • A significant jump can be obtained by other methods like feature engineering, creating an ensemble of models, stacking, etc.

You can also download the iPython notebook with all these model codes from my GitHub account. For codes in R, you can refer to this article.

Conclusion

This tutorial was based on developing an XGBoost machine learning model end-to-end. We started by discussing why XGBoost Parameters has superior performance over GBM, which was followed by a detailed discussion of the various parameters involved. We also defined a generic function that you can reuse for making models. Finally, we discussed the general approach towards tackling a problem with XGBoost and also worked out the AV Data Hackathon 3.x problem through that approach.

Hope you like the article! The XGBoost algorithm is a strong tool used in machine learning. The XGBoost classifier helps improve predictions by using an XGBoost model. To understand how XGBoost works, it’s important to know its gradient boosting method, which is explained by how well it manages data.

Key Takeaways

  • XGBoost Paramters is a powerful machine-learning algorithm, especially where speed and accuracy are concerned.
  • We need to consider different parameters and their values to be specified while implementing an XGBoost model.
  • The XGBoost hyperparameters model requires parameter tuning to improve and fully leverage its advantages over other algorithms.

If you’re looking to take your machine learning skills to the next level, consider enrolling in our Data Science Black Belt program. The curriculum covers all aspects of data science, including advanced topics like XGBoost parameter tuning. With hands-on projects and mentorship, you’ll gain practical experience and the skills you need to succeed in this exciting field. Enroll today and take your XGBoost parameters tuning skills and overall data science expertise to the next level!

Q1. What parameters should you use for XGBoost?

A. The choice of XGBoost parameters depends on the specific task. Commonly adjusted parameters include learning rate (eta), maximum tree depth (max_depth), and minimum child weight (min_child_weight).

Q2. What does the ‘N_estimators’ parameter signify in XGBoost?

A. The ‘n_estimators’ parameter in XGBoost determines the number of boosting rounds or trees to build. It directly impacts the model’s complexity and should be tuned for optimal performance.

Q3. How do you define a hyperparameter in XGBoost?

A. In XGBoost, a hyperparameter is a preset setting that isn’t learned from the data but must be configured before training. Examples include the learning rate, tree depth, and regularization parameters.

Q4. What purpose do regularization parameters serve in XGBoost?

A. XGBoost provides L1 and L2 regularization terms using the ‘alpha’ and ‘lambda’ parameters, respectively. These parameters prevent overfitting by adding penalty terms to the objective function during training.

Aarshay 30 Sep, 2024

Responses From Readers

Clear

Prateek
Prateek 02 Mar, 2016

Please provide the R code as well. Thnkx

Ankur Bhargava
Ankur Bhargava 02 Mar, 2016

It is a great article , but if you could provide codes in R , it would be more beneficial to us. Thanks

Aarshay Jain
Aarshay Jain 02 Mar, 2016

Hi guys, Thanks for reaching out! I've given a link to an article (http://www.analyticsvidhya.com/blog/2016/01/xgboost-algorithm-easy-steps/) in my above article. This has some R codes for implementing XGBoost in R. This won't replicate the results I found here but will definitely help you. Also, I don't use R much but think it should not be very difficult for someone to code it in R. I encourage you to give it a try and share the code as well if you wish :D. In the meanwhile, I'll also try to get someone to write R codes. I'll get back to you if I find something. Cheers, Aarshay

Luca
Luca 02 Mar, 2016

I am wondering whether in practice it is useful such an extreme tuning of the parameters ... it seems that often the standard deviation on the cross validation folds does not allow to really distinguish between different parameters sets... any thoughts on that?

Jay
Jay 02 Mar, 2016

Wow this seems to be very interesting I am new to Python and R programming I am really willing to learn this programming. Will be grateful if anyone here can guide me through that what should I learn first or from where should I start. Thanks Jay

Shan
Shan 03 Mar, 2016

Hi.. Nice article with lots of informations. I was wondering if I can clear my understandings on following : a) On Handling Missing Values, XGBoost tries different things as it encounters a missing value on each node and learns which path to take for missing values in future. Please elaborate on this. b) In function modelfit; the following has been used xgb_param = alg.get_xgb_params() Is get_xgb_params() available in xgb , what does it passes to xgb_param Please explain: alg.set_params(n_estimators=cvresult.shape[0]) Thanks.

StallaB
StallaB 04 Mar, 2016

Fantastic work ! thanks a lot. Now let's hope that we will be able to install XGBoost with a simple pip command :)

Julien Nel
Julien Nel 04 Mar, 2016

Hi Guys, I cant seem to predict probabilities, the gbm.predict is only giving me 0's and 1's.. I put objective="binary:logistic" in but I still only get 0 or 1.. Any tips?

Vikas Reddy
Vikas Reddy 04 Mar, 2016

During feature engineering, if I want to check if a simple change is producing any effect on performance, should I go through the entire process of fine tuning the parameters, which is obviously better than keeping the same parameter values but takes lot of time. So, how often do you tune your parameters?

Anurag
Anurag 05 Mar, 2016

excellent article..... We want Neural Networks as well.

Andre Lopes
Andre Lopes 07 Mar, 2016

At section 3 : - 3.Parameter With tuning, xgtest = xgb.DMatrix(dtest[predictors].values) dtest doesnt exist. Where did you get it? Im trying to learn with your code! Thanks in advance

Gianni
Gianni 07 Mar, 2016

Hi Jain thanks for you effort, this guide is simply awesome ! But just because I wasn't able to find the modified Train Data from the repository (in effect I wasn't able to find the repository, my fault for sure, but I'm working on it), I had to rebuild the modified train data (good exercise !) and I want to share with everyone my code: train.ix[ train['DOB'].isnull(), 'DOB' ] = train['DOB'].max() train['Age'] = (pd.to_datetime( train['DOB'].max(), dayfirst=True ) - pd.to_datetime( train['DOB'], dayfirst=True )).astype('int64') train.ix[ train['EMI_Loan_Submitted'].isnull(), 'EMI_Loan_Submitted_Missing' ] = 1 train.ix[ train['EMI_Loan_Submitted'].notnull(), 'EMI_Loan_Submitted_Missing' ] = 0 train.ix[ train['Existing_EMI'].isnull(), 'Existing_EMI' ] = train['Existing_EMI'].median() train.ix[ train['Interest_Rate'].isnull(), 'Interest_Rate_Missing' ] = 1 train.ix[ train['Interest_Rate'].notnull(), 'Interest_Rate_Missing' ] = 0 train.ix[ train['Loan_Amount_Applied'].isnull(), 'Loan_Amount_Applied' ] = train['Loan_Amount_Applied'].median() train.ix[ train['Loan_Tenure_Applied'].isnull(), 'Loan_Tenure_Applied' ] = train['Loan_Tenure_Applied'].median() train.ix[ train['Loan_Amount_Submitted'].isnull(), 'Loan_Amount_Submitted_Missing' ] = 1 train.ix[ train['Loan_Amount_Submitted'].notnull(), 'Loan_Amount_Submitted_Missing' ] = 0 train.ix[ train['Loan_Tenure_Submitted'].isnull(), 'Loan_Tenure_Submitted_Missing' ] = 1 train.ix[ train['Loan_Tenure_Submitted'].notnull(), 'Loan_Tenure_Submitted_Missing' ] = 0 train.ix[ train['Processing_Fee'].isnull(), 'Processing_Fee_Missing' ] = 1 train.ix[ train['Processing_Fee'].notnull(), 'Processing_Fee_Missing' ] = 0 train.ix[ ( train['Source'] != train['Source'].value_counts().index[0] ) & ( train['Source'] != train['Source'].value_counts().index[1] ), 'Source' ] = 'S000' # Numerical Categorization from sklearn.preprocessing import LabelEncoder var_mod = [] # Nessun valore numerico da categorizzare, in caso contrario avremmo avuto una lista di colonne le = LabelEncoder() for i in var_mod: train[i] = le.fit_transform(train[i]) #One Hot Coding: train = pd.get_dummies(train, columns=['Source', 'Gender', 'Mobile_Verified', 'Filled_Form', 'Device_Type','Var1','Var2']) train.drop(['City','DOB','EMI_Loan_Submitted','Employer_Name','Interest_Rate','Lead_Creation_Date','Loan_Amount_Submitted', 'Loan_Tenure_Submitted','LoggedIn','Salary_Account','Processing_Fee'], axis=1, inplace=True) Just because the way I constructed my "age" column, results are a little different, but plus or minus all ought to be right. Thanks everyone, this site is pure gold for me. I learned here in a month more than I learned everywhere in years ... I'm just guessing where I will be in a year from now.

Mahesh
Mahesh 12 Mar, 2016

Guys, Please help me with xgboost installation on windows

Vitaliy Radchenko
Vitaliy Radchenko 13 Mar, 2016

I have the error cvresult = xgb.cv(xgb_param, xgtrain, num_boost_round=alg.get_params()['n_estimators'], nfold=cv_folds, metrics='auc', early_stopping_rounds=early_stopping_rounds, show_progress=False) raise ValueError('Check your params.'\ ValueError: Check your params.Early stopping works with single eval metric only. How can I fix it? Thank you in advance.

Daniel
Daniel 14 Mar, 2016

Hi Aarshay, quick question: if I try to do multi-class classification, python send error as follows: xgb1 = XGBClassifier( learning_rate =0.1, n_estimators=1000, max_depth=5, min_child_weight=1, gamma=0, subsample=0.8, colsample_bytree=0.8, n_class=4, objective="multi:softmax", nthread=4, scale_pos_weight=1, seed=27) Traceback (most recent call last): File "", line 15, in seed=27) TypeError: __init__() got an unexpected keyword argument 'n_class' When i try "num_class" instead it does not work either nor with "n_classes" the sklearn wrapper I assume, Any Thoughts? thanks, Daniel

Praveen Gupta Sanka
Praveen Gupta Sanka 16 Mar, 2016

Hi Aarshay, The youtube video link you posted is not working. (Error is "This video is private") https://www.youtube.com/watch?v=X47SGnTMZIU Is there any other source where we can watch the video? Thanks, Praveen

Praveen Gupta Sanka
Praveen Gupta Sanka 23 Mar, 2016

Hi Aarshay, As always, a great article. I have two doubts 1. n_estimators=cvresult.shape[0] we have set this while fitting the algorithm for XGBoost. Any specific reason why we did in that way. 2. In the model fit function, we are not generating CV score as the output.. How are we automatically able to get it in box with red background. I am not getting CV value. Am I missing something? Can you please clarify Regards, Praveen

VZ
VZ 05 Apr, 2016

When I try the GridSearchCV my system does not do anything. It sits there for a long time, but I can check the activity monitor and nothing happens, no crash, no message, no activity. Any clue?

David Comfort
David Comfort 06 Apr, 2016

I get an error: XGBClassifier' object has no attribute 'feature_importances_' It looks like it a known issue with XGBClassifier. See https://www.kaggle.com/c/homesite-quote-conversion/forums/t/18669/xgb-importance-question-lost-features-advice/106421 and https://github.com/dmlc/xgboost/issues/757#issuecomment-174550974 I can get the feature importances with the following: def importance_XGB(clf): impdf = [] for ft, score in clf.booster().get_fscore().iteritems(): impdf.append({'feature': ft, 'importance': score}) impdf = pd.DataFrame(impdf) impdf = impdf.sort_values(by='importance', ascending=False).reset_index(drop=True) impdf['importance'] /= impdf['importance'].sum() return impdf importance_XGB(xgb1)

VZ
VZ 09 Apr, 2016

Sorry to bother you again, but would you mind elaborating a little more on the code in modelfit, in particular: if useTrainCV: xgb_param = alg.get_xgb_params() xgtrain = xgb.DMatrix(dtrain[predictors].values, label=dtrain[target].values) cvresult = xgb.cv(xgb_param, xgtrain, num_boost_round=alg.get_params()['n_estimators'], nfold=cv_folds, metrics='auc', early_stopping_rounds=early_stopping_rounds, show_progress=False) alg.set_params(n_estimators=cvresult.shape[0]) Thank you very for your time.

Curtis
Curtis 11 Apr, 2016

Thanks for your work here - great job! Is it be possible to be notified when a similar article to this one is released for Neural Networks?

Jose Magana
Jose Magana 14 Apr, 2016

Hello, really great article, I have learnt a lot from it. One question, you mention the default value for scale_pos_weight is 0. Where have you got this information from? Checking the source code (regresion_obj.cc) I have found the value to be 1 by default, with a lower bound of 0. In the R version, that I use, the parameter does not appear explicitly. Can you please clarify? Thanks in advance

Diego
Diego 21 Apr, 2016

I'm getting this strange error:"WindowsError: exception: access violation reading 0x000000000D92066C" Any Idea what may be causing it? FYI, if I don't include the [] on the metric parameter, I get: "ValueError: Check your params.Early stopping works with single eval metric only." (same as the user above) cvresult = xgb.cv(xgb_param, xgtrain, num_boost_round=alg.get_params()['n_estimators'], nfold=5, metrics=['logloss'], early_stopping_rounds=25, show_progress=False) Will train until cv error hasn't decreased in 25 rounds. Traceback (most recent call last): File "", line 2, in metrics=['logloss'], early_stopping_rounds=25, show_progress=False) File "C:\Anaconda2\lib\site-packages\xgboost-0.4-py2.7.egg\xgboost\training.py", line 415, in cv cvfolds = mknfold(dtrain, nfold, params, seed, metrics, fpreproc) File "C:\Anaconda2\lib\site-packages\xgboost-0.4-py2.7.egg\xgboost\training.py", line 275, in mknfold dtrain = dall.slice(np.concatenate([idset[i] for i in range(nfold) if k != i])) File "C:\Anaconda2\lib\site-packages\xgboost-0.4-py2.7.egg\xgboost\core.py", line 494, in slice ctypes.byref(res.handle))) WindowsError: exception: access violation reading 0x000000000D92066C

Jose Magana
Jose Magana 10 May, 2016

According to this: https://www.kaggle.com/c/santander-customer-satisfaction/forums/t/20662/overtuning-hyper-parameters-especially-re-xgboost If you are using logistic trees, as I understand your article describes, alpha and lambda don't play any role. I would appreciate your feedback Thanks in advance

Liming Hu
Liming Hu 17 May, 2016

It is a great blog. It will be better, if you can give a parameter tuning for a regression problem, although a lot of stuff will be similiar to the classification problem.

Sunil Sangwan
Sunil Sangwan 06 Jun, 2016

Thanks great article.

Emrah Yigit
Emrah Yigit 09 Jun, 2016

Great article. Thank you.

Tanguy
Tanguy 04 Sep, 2016

Thanks for the article, very useful :-) I was wondering if an article on "stacking" was in the pipe?

Michelle
Michelle 05 Oct, 2016

Hi Jian, Just a quick question. you use test_results.csv in modelfit function. Where is the cvs file? I couldn't find it. test_results = pd.read_csv('test_results.csv') Thank you. Michelle

Installing XGBoost on Mac OSX (IT Best Kept Secret Is Optimization) – Cloud Data Architect
Installing XGBoost on Mac OSX (IT Best Kept Secret Is Optimization) – Cloud Data Architect 05 Jan, 2017

[…] I explain how to enable multi threading for XGBoost, let me point you to this excellent Complete Guide to Parameter Tuning in XGBoost (with codes in Python).  I found it useful as I started using XGBoost.  And I assume that you could be interested if you […]

Installing XGBoost on Mac OSX (IT Best Kept Secret Is Optimization) – Iot Portal
Installing XGBoost on Mac OSX (IT Best Kept Secret Is Optimization) – Iot Portal 25 Jan, 2017

[…] I explain how to enable multi threading for XGBoost, let me point you to this excellent Complete Guide to Parameter Tuning in XGBoost (with codes in Python).  I found it useful as I started using XGBoost.  And I assume that you could be interested if you […]

Sudarson
Sudarson 17 May, 2017

1) Hi can you also share how to use a new dataset to be predicted upon completing the above mentioned tuning processes. 2)Also by ensembles of model, if I'm right does it mean like I use multiple models to classify / predict and finally use the predictions as features and create a model on top of it?

Kai
Kai 20 May, 2017

Hi, Thanks for sharing. One question: how do you decide what random seed to use. Is 27 just a random pick?

Leo Hung
Leo Hung 03 Jun, 2017

Hi guys, Is there anyone who can run all the code above without getting errors? I got errors in step one and two. It said "ValueError: could not convert string to float: 'S122'" in step 1 and "Parameter values for parameter (max_depth) need to be a sequence" in step two.

Jhakir Miah
Jhakir Miah 30 Jun, 2017

This is a great article, Aarshay. Thank you so much for writing it. I am a newbie in data science. Once I follow this article and tune my parameters, how do I get the model to make a prediction on test data and see the prediction? Please help me with sample code. Thank you in advance.

Kalle
Kalle 24 Jul, 2017

I have one question related to #Predict training set part: One line before this part, we trained the algorithm on the training set. Could you please explain why do we need to find the prediction of the algorithm on the same training set? Regards, Kalle

Akshat Singhal
Akshat Singhal 24 Jul, 2017

How can I set tree_method to be 'exact' in XGBoost Classifier? (required for huge datasets)

Varun
Varun 27 Aug, 2017

I ran the code for n_estimator tuning. It showed me the accuracy but didn't show the optimized no. of estimators. What can be the error?

Jake
Jake 19 Sep, 2017

This article is very well done and a helpful guide to get up and running with XGBoost parameter tuning. Once concern I have: Is there a reason why you don't hold out test data or use any type of cross validation for evaluating model performance? Maybe I missed something (I've been known to speed read and skip over important information).

Anshul Bisht
Anshul Bisht 18 Nov, 2017

Hi guyz , awesome blog , I had a doubt why is the n_estimator having different values in different steps in step -3 it is = 1000 above it is taken as 140 and the nxt step has 177 at last we have 5000 .

Jimmy Chen
Jimmy Chen 06 Mar, 2018

Hello Aarshay This is really great article, I have learnt a lot from it. One question, when i tuning the model using dataset ( size = 1gb ), the model ran very slowly , do you know why it ran too slowly ? Thanks

Pritha
Pritha 07 Apr, 2018

Thanks Aarshay. This is a great article I am getting an error while trying to make predictions on test data set. Would it be possible to provide a sample code Thanks,

Johan Rensink
Johan Rensink 11 Apr, 2018

Very impressive, I learned a lot. thanks for writing this! JR

Kate
Kate 11 May, 2018

Hi Aarshay! I'm running your code on my own data. For this I use the xgbregressor with objective (reg:linear). I want it to minimize the root mean squared error (RMSE). To do this, I use the neg_mean_squared_error as scoring function in the GridSearchCV. However, in the second part of the tuning (gsearch2 in your code) it gives me best_params_ that result in a lower RMSE. How is this possible? Moreover, the gsearch2.best_score_ gives me values like -77, while the RMSE of this function is 4,413. What should I do to make these two scores agree? Should I change the scoring function? if so, to what should I change it? Cheers

Pedro
Pedro 05 Jan, 2022

I am not receiving this message box from the first step - there is a pink box with the message before the print output: "Will train until cv error hasn't decreased in 50 rounds. Stopping Best Iteration: [140] : ---" What should I do to have it showing?

sam
sam 08 Feb, 2022

hi , Sorry. I did see where is the code to get "140 as the optimal estimators". Could anyone highlight the code to me? Thanks, Sam

skan
skan 16 Jul, 2022

If you use too many hyperparameters you will end up overfitting some of them just by chance, even if you use cross-validation.

Quang
Quang 17 Dec, 2022

This is a great article, Aarshay. Thank you so much for writing it. I am a newbie in data science. Once I follow this article and tune my parameters, how do I get the model to make a prediction on test data and see the prediction? Please help me with sample code Parameter Tuning in XGBoost by SPO,GA in python . Thank you in advance.

Prabhakaran
Prabhakaran 13 Mar, 2024

Thanks for such a detailed article !!! This really helps in understanding XGBoost