We use cookies essential for this site to function well. Please click to help us improve its usefulness with additional cookies. Learn about our use of cookies in our Privacy Policy & Cookies Policy.

Show details

Step by Step process of Feature Engineering for Machine Learning Algorithms in Data Science

ELLURU PAVAN KUMAR 25 Mar, 2021
7 min read

Introduction

Data Science is not a field where theoretical understanding helps you to start a carrier. It totally depends on the projects you do and the practice you have done that determines your probability of success. Feature engineering is a very important aspect of machine learning and data science and should never be ignored. The main goal of Feature engineering is to get the best results from the algorithms.

feature_engineering

Table of Contents

  1. Why should we use Feature Engineering in data science?
  2. Feature Selection
  3. Handling missing values
  4. Handling imbalanced data
  5. Handling outliers
  6. Binning
  7. Encoding
  8. Feature Scaling

1. Why should we use Feature Engineering in data science?

In Data Science, the performance of the model is depending on data preprocessing and data handling. Suppose if we build a model without Handling data, we got an accuracy of around 70%. By applying the Feature engineering on the same model there is a chance to increase the performance from 70% to more.

Simply, by using Feature Engineering we improve the performance of the model.

 

2. Feature selection

Feature selection is nothing but a selection of required independent features. Selecting the important independent features which have more relation with the dependent feature will help to build a good model. There are some methods for feature selection:

2.1 Correlation Matrix with Heatmap

Heatmap is a graphical representation of 2D (two-dimensional) data. Each data value represents in a matrix.

Firstly, plot the pair plot between all independent features and dependent features. It will give the relation between dependent and independent features. The relation between the independent feature and the dependent feature is less than 0.2 then choose that independent feature for building a model.

 Feature Engineering  correlation heatmap

2.2 Univariate Selection

In this, Statistical tests can be used to select the independent features which have the strongest relationship with the dependent feature. SelectKBest method can be used with a suite of different statistical tests to select a specific number of features.

Univariate Selection
feature engineering steps univariate selection

 

  • Which feature has the highest score will be more related to the dependent feature and choose those features for the model.

2.3 ExtraTreesClassifier method

In this method, the ExtraTreesClassifier method will help to give the importance of each independent feature with a dependent feature. Feature importance will give you a score for each feature of your data, the higher the score more important or relevant to the feature towards your output variable.

ExtraTreesClassifier method
Feature engineering steps ExtraTreesClassifier method output

 

3. Handling Missing Values

In some datasets, we got the NA values in features. It is nothing but missing data. By handling this type of data there are many ways:

  • In the missing value places, to replace the missing values with mean or median to numerical data and for categorical data with mode.
Handling Missing Values

 

  • Drop NA values entire rows.
Drop NA

 

  • Drop NA values entire features. (it helps if NA values are more than 50% in a feature)
Drop NA values

 

  • Replace NA values with 0.
Replace NA values

If you choose to drop options, there is a chance to lose important information from them. So better to choose to replace options.

 

4. Handling imbalanced data

Why need to handle imbalanced data? Because of to reduce overfitting and underfitting problem.

suppose a feature has a factor level2(0 and 1). it consists of 1’s is 5% and 0’s is 95%. It is called imbalanced data.

Example:-

Handling imbalanced data 101

By preventing this problem there are some methods:

4.1 Under-sampling majority class

Under-sampling the majority class will resample the majority class points in the data to make them equal to the minority class.

Under-sampling majority class feature engineering steps

4.2 Over Sampling Minority class by duplication

Oversampling minority class will resample the minority class points in the data to make them equal to the majority class.

Over Sampling Minority class by duplication feature engineering steps

 

4.3 Over Sampling minority class using Synthetic Minority Oversampling Technique (SMOTE)

In this method, synthetic samples are generated for the minority class and equal to the majority class.

Over Sampling minority class using Synthetic Minority Oversampling Technique (SMOTE)   feature engineering

5. Handling outliers

firstly, calculate the skewness of the features and check whether they are positively skewed, negatively skewed, or normally skewed. Another method is to plot the boxplot to features and check if any values are out of bounds or not. if there, they are called outliers.

Handling outliers fature engineering steps

how to handle these outliers: –

first, calculate quantile values at 25% and 75%.

 

how to handle these outliers code feature engineering steps

 

  • next, calculate the Interquartile range

IQR = Q3 – Q1

IQR = Q3 – Q1
  • next, calculate the upper extreme and lower extreme values

lower extreme=Q1 – 1.5 * IQR

upper extreme=Q3– 1.5 * IQRe

upper extreme and lower extreme values feature engineering

 

  • lastly, check the values will lie above the upper extreme or below the lower extreme. if it presents then remove them or replace them with mean, median, or any quantile values.
  • Replace outliers with mean
Replace outliers with mean feature engineering

 

  • Replace outliers with quantile values
Replace outliers with quantile values

 

  • Drop outliers
Drop outliers

6. Binning

Binning is nothing but any data value within the range is made to fit into the bin. It is important in your data exploration activity. We typically use it to transform continuous variables into discrete ones.

Suppose if we have AGE feature in continuous and we need to divide the age into groups as a feature then it will be useful.

AGE feature

7. Encoding:

Why this will apply? because in datasets we may contain object datatypes. for building a model we need to have all features are in integer datatypes. so, Label Encoder and OneHotEncoder are used to convert object datatype to integer datatype.

  • Label Encoding

 

Encoding feature engineering

Before applying Label Encoding

Label Encoding

 

Label Encoding feature engineering

After applying label encoding then apply the column transformer method to convert labels to 0 and 1

label encoding
  • One Hot Encoding:

By applying get_dummies we convert directly categorical to numerical

One Hot Encoding

 

8. Feature scaling

Why this scaling is applying? because to reduce the variance effect and to overcome the fitting problem. there are two types of scaling methods:

8.1 Standardization

When this method is used?. when all features are having high values, not 0 and 1.

It is a technique to standardize the independent features that present in a fixed range to bring all values to the same magnitudes.

Standardization feature engineering steps

In standardization, the mean of the independent features is 0 and the standard deviation is 1.

Method 1:

 

code
Method 1 output

Method2:

code Method2

 

After encoding feature labels are in 0 and 1. This may affect standardization. To overcome this, we use Normalization.

8.2 Normalisation

Normalization also makes the training process less sensitive by the scale of the features. This results in getting better coefficients after training.

formula

Method 1: -MinMaxScaler

It is a method to rescales the feature to a hard and fast range of [0,1] by subtracting the minimum value of the feature then dividing by the range.

MinMaxScaler feaure engineering

Method 2: – Mean Normalization

It is a method to rescales the feature to a hard and fast range of [-1,1] with mean=0.

Mean Normalization
Mean Normalization

 

Mean Normalization feature engineering output

 

End Notes:-

In this article, I covered step by step process of feature engineering. This is more helpful to increase prediction accuracy.

Keep in mind that there are no particular methods to increase your prediction accuracy. It all depends on your data and applies multiple methods.

As a next step, I encourage you to try out different datasets and analyze them. And don’t forget to share your insights in the comments section below!

About the Author:

I am Pavan Kumar Reddy Elluru. I completed my graduation at G.Pullareddy Engineering College in the year 2020. I am a certified data scientist in the year 2021 and passionate about Machine Learning and Deep Learning Projects.

Please ping me in case of any queries or just to say hi!

Email id:- [email protected]

Linkedin id:www.linkedin.com/in/elluru-pavan-kumar-reddy-a1b183197

Github id: – pawankumarreddy1999 (Pavan Kumar Reddy Elluru) (github.com)

ELLURU PAVAN KUMAR 25 Mar, 2021