# Simple Yet Powerful Excel Tricks for Analyzing Data

SHARE
, /

## Introduction

I’ve always admired the immense power of Excel. This software is not only capable of doing basic data computations, but you can also perform data analysis using it. It is widely used for many purposes including the likes of financial modeling and business planning. It can become a good stepping stone for people who are new to the world of data analysis.

Even before learning R or Python, it is advisable to have knowledge of Excel. It does no harm to add excel in your skill sets. Excel, with its wide range of functions, visualization, arrays empowers you to quickly generate insights from data which would be hard to see otherwise.

It has a few drawbacks as well. It can’t handle large data sets very efficiently. I’ve personally faced this issue. Try doing computations of data ~ 200,000 entries and you’ll notice that excel starts struggling. There are ways to work around and handle this data to some extent, but Excel is not a big data tool. In such cases, R or Python are the best bets.

I feel fortunate that my journey started with Excel. Over the years, I’ve learnt many tricks to work to deal with data faster than ever. Excel has numerous functions. It becomes confusing at times to choose the best one. In this article, I’ll provide you some tips and tricks to work on Excel and save you time. This article is best suited to people keen to upgrade their data analysis skills.

Note: If you think you are a master coder in data science, you won’t find this article useful. For others, I’d recommend you to practice these tricks to develop a concrete understanding of them.

## Commonly used functions

1. Vlookup(): It helps to search a value in a table and returns a corresponding value. Let’s look at the table below (Policy and Customer). In Policy table, we want to map city name from the customer tables based on common key “Customer id”. Here, function vlookup() would help to perform this task.

`Syntax: =VLOOKUP(Key to lookup, Source_table, column of source table, are you ok with relative match?)`

For above problem, we can write formula in cell “F4” as =VLOOKUP(B4, \$H\$4:\$L\$15, 5, 0) and this will return the city name for all the Customer id 1 and post that copy this formula for all Customer ids.

Tip: Do not forget to lock the range of the second table using “\$” sign – a common error when copying this formula down. This is known as relative referencing.

2. CONCATINATE():  It is very useful to combine text from two or more cells into one cell. For example: we want to create a URL based on input of host name and request path.

`Syntax: =Concatenate(Text1, Text2,.....Textn)`

Above problem can be solved using formula, =concatenate(B3,C3) and copy it.

Tip: I prefer using “&” symbol, because it is shorter than typing a full “concatenate” formula, and does the exactly same thing. The formula can be written as  “= B3&C3”.

3. LEN() – This function tells you about the length of a cell i.e. number of characters including spaces and special characters .

```Syntax: =Len(Text)
```

Example: =Len(B3) = 23

4. LOWER(), UPPER() and PROPER() –These three functions help to change the text to lower, upper and sentence case respectively (First letter of each word capital).

`Syntax: =Upper(Text)/ Lower(Text) / Proper(Text)`

In data analysis project, these are helpful in converting classes of different case to a single case else these are considered as different classes of the given feature. Look at the below snapshot, column A has five classes (labels) where as Column B has only two because we have converted the content to lower case.

5. TRIM(): This is a handy function used to clean text that has leading and trailing white space. Often when you get a dump of data from a database the text you’re dealing with is padded with blanks. And if you don’t deal with them, they are also treated as unique entries in a list, which is certainly not helpful.

```Syntax: =Trim(Text)

```

6. If(): I find it one of the most useful function in excel. It lets you use conditional formulas which calculate one way when a certain thing is true, and another way when false. For example, you want to mark each sales as “High” and “Low”. If sales is greater than or equals to \$5000 then “High” else “Low”.

```Syntax: =IF(condition, True Statement, False Statement)
```

## Generating inference from Data

1. Pivot Table: Whenever you are working with company data, you seek answers for questions like “How much revenue is contributed by branches of North region?” or “What was the average number of customers for product A?” and many others.

Excel’s PivotTable helps you to answer these questions effortlessly. Pivot table is a summary table that lets you count, average, sum, and perform other calculations according to the reference feature you have selected i.e.  It converts a data table to inference table which helps us to take decisions. Look at the below snapshot:
Above, you can see that table on the left has sales detail against each customer with region and product mapping. In table to the right, we have summarized the information at region level which now helps us to generate a inference that South region has highest sales.

Methods to create Pivot table:
Step-1: Click somewhere in the list of data. Choose the Insert tab, and click PivotTable. Excel will automatically select the area containing data, including the headings. If it does not select the area correctly, drag over the area to select it manually. Placing the PivotTable on a new sheet is best, so click New Worksheet for the location and then click OKStep-2: Now, you can see the PivotTable Field List panel, which contains the fields from your list; all you need to do is to arrange them in the boxes at the foot of the panel. Once you have done that, the diagram on the left becomes your PivotTable.
Above, you can see that we have arranged “Region” in row, “Product id” in column and sum of “Premium” is taken as value. Now you are ready with pivot table which shows Region and Product wise sum of premium. You can also use count, average, min, max and other summary metric. For more detail on Pivot table, I would suggest you to refer this link.

2. Creating Charts: Building a chart/ graph in excel requires nothing more than selecting the range of data you wish to chart and press F11. This will create a excel chart in default chart style but you can change it by selecting different chart style. If you prefer the chart to be on the same worksheet as the data, instead of pressing F11, press ALT + F1.

Of course, in either case, once you have created the chart, you can customize to your particular needs to communicate your desired message.To know about different properties of charts, I would recommend to refer this link.

## Data Cleaning

1. Remove duplicate values: Excel has inbuilt feature to remove duplicate values from a table. It removes the duplicate values from given table based on selected columns i.e. if you have selected two columns then it searches for duplicate value having same combination of both columns data.

Above, you can see that A001 and A002 have duplicate value but if we select both columns “ID” and “Name” then we have only one duplicate value (A002, 2).
Follow the these steps to remove duplicate values: Select data –> Go to Data ribbon –> Remove Duplicates

2. Text to Columns: Let’s say you have data stored in column as shown in below snapshot.
Above, you can see that values are separated by semi colon “;”. Now to split these values in different column, I will recommend to use “Text to Columns” feature in excel. Follow below steps to convert it to different columns:

1. Select the range A1:A6
2. Go to “Data” ribbon –> “Text to Columns”
Above, we have two options “Delimited” and “Fixed width”. I have selected delimited because the values are separated by a delimiter(;). If we would be interested to split data based on the width such as first four character to first column, 5 to 10th character to second column, then we would choose Fixed width.
3. Click on Next –>Mark check box on for “Semi colon” then Next and finish.

## Essential keyboard shortcuts

Keyboard shortcuts are the best way to navigate cells or enter formulas more quickly. We’ve listed our favorites below.

1. Ctrl +[Down|Up Arrow]: Moves to the top or bottom cell of the current column and combination of Ctrl with Left|Right Arrow key, moves to the cell furthest left or right in the current row
2. Ctrl + Shift + Down/Up Arrow: Selects all the cells above or below the current cell
3. Ctrl+ Home: Navigates to cell A1
4. Ctrl+End: Navigates to the last cell that contains data
5. Alt+F1: Creates a chart based on selected data set.
6. Ctrl+Shift+L: Activate auto filter to data table
7. Alt+Down Arrow: To open the drop down menu of autofilter.  To use this shortcut:
8. Alt+D+S: To sort the data set
9. Ctrl+O: Open a new workbook
10. Ctrl+N: Create a new workbook
11. F4: Select the range and press F4 key, it will change the reference to absolute, mixed and relative.

Note: This isn’t an exhaustive list. Feel free to share your favorite keyboard shortcuts in Excel in the comments section below. Literally, I do 80% of excel tasks using shortcuts.

## End Notes

Excel is arguably one of the best programs ever made, and it has remained the gold standard for nearly all businesses worldwide. But whether you’re a newbie or a power user, there’s always something left to learn. Or do you think you’ve seen it all and done it all? Let us know what we’ve missed in the comments.

### If you like what you just read & want to continue your analytics learning, subscribe to our emails, follow us on twitter or like our facebook page.

Author
I am a Business Analytics and Intelligence professional with deep experience in the Indian Insurance industry. I have worked for various multi-national Insurance companies in last 7 years.
This is article is quiet old now and you might not get a prompt response from the author. We would request you to post this comment on Analytics Vidhya Discussion portal to get your queries resolved.

• Abdel says:

The article is very good, maybe you can add SUMIF, SUMIFS and MATCH which I use a lot.

• Ram says:

• Anupam Basu says:

I really admire the topics related to analytics spoken in such forums. And no one does it better than Analytics Vidhya. I have been involved in interviews over the last 5 months or so (all Data Science/Analytics positions, both operational & leadership). I was amazed at the number of times anything to do with Excel was mentioned or asked. Literally 0 (I’m not joking). Excel is a very powerful tool according to me too. Whenever I start doing any analytics I first start off with Excel. It is amazing how just by playing around with a pivot & a chart it’s thought provoking. Great job people. Keep up the good work!

• Ritik says:

Also Can you plz tell us the Analytics tools plugin in excel and some of its features

• Steven Rutt says:

One of the other great things about it Excel is all of the Power BI tools they have been adding. Extracting and cleaning data is much easier and it is much easier to work with large data sets.

• ritesh says:

Good article to cover the basic useful excel functionalities. If possible please try to cover some advanced data analysis features in excel, like dashboard preparation, data analysis functions etc.
Thanks a lot for sharing.

• Murali says:

My favorites.
1. Select data and Alt + E + S [Paste Special] followed by V [only values] or E [Transpose] and many more.
2. To freeze panes: Alt + W + F + F
3. To Clear data: Alt + H + E + A (Select data before using it)
4. Shift between sheets: Ctrl + PgUp/Pg Dn
5. Border: Alt + H + B + A (Select data before using it)
6. Finally Alt + N + N for line graph (Select data before using it)

• Hunaidkhan says:

When data is Filtered -> Alt + Down + right key + E will allow you to text search the filtered data.( Very useful )
Alt + A + M is shortcut to remove Duplicates,
Index and Match is better than Vlookup while searching data in a sheet.
Alt + H + V + V is the shortcut to paste special which is very useful to do the analysis faster.
Alt + A + T or Alt + D+ F +F is also shortcut to filter the data .

i do have many more useful shortcuts which i use for my everyday analysis

• Shashi says:

Excel 2016 in the game now, would change the equation in the analytics industry. Plethora of chart types more features are spicing it up…When it comes to minute customization of data presentation Excel is much better than Tableau/Qlikview.
Only pain with excel is as Sunil said handling of data size…MS should seriously think of it..
Can MS build excel based on In-Memory technology for the lightning speed performance?

• Achin says:

One function which stand out and have used a lot by me is Vlookup. Absolute fan of this function. Data analysis, reconciliation activities involving financial data.