Activation Functions and their Derivatives – A Quick & Complete Guide
Introduction
In Deep learning, a neural network without an activation function is just a linear regression model as these functions actually do the nonlinear computations to the input of a neural network making it capable to learn and perform more complex tasks. Thus, it is quite essential to study the derivatives and implementation of activation functions, also analyze the benefits and downsides for each activation function, for choosing the right type of activation function that could provide nonlinearity and accuracy in a specific neural network model.
Table of Contents
 Introduction to Activation Functions
 Types of Activation Functions
 Activation Functions and their Derivatives
 Implementation using Python
 Pros and Cons of Activation Functions
Introduction to Activation Functions
What it actually is?
Activation functions are functions used in a neural network to compute the weighted sum of inputs and biases, which is in turn used to decide whether a neuron can be activated or not. It manipulates the presented data and produces an output for the neural network that contains the parameters in the data. The activation functions are also referred to as transfer functions in some literature. These can either be linear or nonlinear
depending on the function it represents and is used to control the output of neural networks across different domains.
For a linear model, a linear mapping of an input function to output is performed in the hidden layers before the final prediction for each label is given. The input vector x transformation is given by
f(x) = w^{T . }x + b
where, x = input, w = weight, and b = bias.
Linear results are produced from the mappings of the above equation and the need for the activation function arises here, first to convert these linear outputs into nonlinear output for further computation, and then to learn the patterns in the data. The output of these models are given by
y = (w_{1 }x_{1} + w_{2 }x_{2} + … + w_{n }x_{n} + b)
These outputs of each layer are fed into the next subsequent layer for multilayered networks until the final output is obtained, but they are linear by default. The expected output is said to determine the type of activation function that has to be deployed in a given network.
However, since the outputs are linear in nature, the nonlinear activation functions are required to convert these linear inputs to nonlinear outputs. These transfer functions, applied to the outputs of the linear models to produce the transformed nonlinear outputs are ready for further processing. The nonlinear output after the application of the activation function is given by
y = α (w_{1} x_{1} + w_{2} x_{2 } + … + w_{n} x_{n} + b)
where α is the activation function.
Why Activation Functions?
The need for these activation functions includes converting the linear input signals and models into nonlinear output signals, which aids the learning of high order polynomials for deeper networks.
How to use it?
In a neural network every neuron will do two computations:
 Linear summation of inputs: In the above diagram, it has two inputs x_{1}, x_{2} with weights w_{1}, w_{2,} and bias b. And the linear sum z = w_{1} x_{1} + w_{2} x_{2 } + … + w_{n} x_{n} + b
 Activation computation: This computation decides, whether a neuron should be activated or not, by calculating the weighted sum and further adding bias with it. The purpose of the activation function is to introduce nonlinearity into the output of a neuron.
Most neural networks begin by computing the weighted sum of the inputs. Each node in the layer can have its own unique weighting. However, the activation function is the same across all nodes in the layer. They are typical of a fixed form whereas the weights are considered to be the learning parameters.
What is a Good Activation Function?
A proper choice has to be made in choosing the activation function to improve the results in neural network computing. All activation functions must be monotonic, differentiable, and quickly converging with respect to the weights for optimization purposes.
Types of Activation Functions
The different kinds of activation functions include:
1) Linear Activation Functions
A linear function is also known as a straightline function where the activation is proportional to the input i.e. the weighted sum from neurons. It has a simple function with the equation:
f(x) = ax + c
The problem with this activation is that it cannot be defined in a specific range. Applying this function in all the nodes makes the activation function work like linear regression. The final layer of the Neural Network will be working as a linear function of the first layer. Another issue is the gradient descent when differentiation is done, it has a constant output which is not good because during backpropagation the rate of change of error is constant that can ruin the output and the logic of backpropagation.
2) NonLinear Activation Functions
The nonlinear functions are known to be the most used activation functions. It makes it easy for a neural network model to adapt with a variety of data and to differentiate between the outcomes.
These functions are mainly divided basis on their range or curves:
a) Sigmoid Activation Functions
Sigmoid takes a real value as the input and outputs another value between 0 and 1. The sigmoid activation function translates the input ranged in (∞,∞) to the range in (0,1)
b) Tanh Activation Functions
The tanh function is just another possible function that can be used as a nonlinear activation function between layers of a neural network. It shares a few things in common with the sigmoid activation function. Unlike a sigmoid function that will map input values between 0 and 1, the Tanh will map values between 1 and 1. Similar to the sigmoid function, one of the interesting properties of the tanh function is that the derivative of tanh can be expressed in terms of the function itself.
c) ReLU Activation Functions
The formula is deceptively simple: max(0,z). Despite its name, Rectified Linear Units, it’s not linear and provides the same benefits as Sigmoid but with better performance.
(i) Leaky Relu
Leaky Relu is a variant of ReLU. Instead of being 0 when z<0, a leaky ReLU allows a small, nonzero, constant gradient α (normally, α=0.01). However, the consistency of the benefit across tasks is presently unclear. Leaky ReLUs attempt to fix the “dying ReLU” problem.
(ii) Parametric Relu
PReLU gives the neurons the ability to choose what slope is best in the negative region. They can become ReLU or leaky ReLU with certain values of α.
d) Maxout:
The Maxout activation is a generalization of the ReLU and the leaky ReLU functions. It is a piecewise linear function that returns the maximum of inputs, designed to be used in conjunction with the dropout regularization technique. Both ReLU and leaky ReLU are special cases of Maxout. The Maxout neuron, therefore, enjoys all the benefits of a ReLU unit and does not have any drawbacks like dying ReLU. However, it doubles the total number of parameters for each neuron, and hence, a higher total number of parameters need to be trained.
e) ELU
The Exponential Linear Unit or ELU is a function that tends to converge faster and produce more accurate results. Unlike other activation functions, ELU has an extra alpha constant which should be a positive number. ELU is very similar to ReLU except for negative inputs. They are both in the identity function form for nonnegative inputs. On the other hand, ELU becomes smooth slowly until its output equal to α whereas ReLU sharply smoothes.
f) Softmax Activation Functions
Softmax function calculates the probabilities distribution of the event over ‘n’ different events. In a general way, this function will calculate the probabilities of each target class over all possible target classes. Later the calculated probabilities will help determine the target class for the given inputs.
When to use which Activation Function in a Neural Network?
Specifically, it depends on the problem type and the value range of the expected output. For example, to predict values that are larger than 1, tanh or sigmoid are not suitable to be used in the output layer, instead, ReLU can be used. On the other hand, if the output values have to be in the range (0,1) or (1, 1) then ReLU is not a good choice, and sigmoid or tanh can be used here. While performing a classification task and using the neural network to predict a probability distribution over the mutually exclusive class labels, the softmax activation function should be used in the last layer. However, regarding the hidden layers, as a rule of thumb, use ReLU as an activation for these layers.
In the case of a binary classifier, the Sigmoid activation function should be used. The sigmoid activation function and the tanh activation function work terribly for the hidden layer. For hidden layers, ReLU or its better version leaky ReLU should be used. For a multiclass classifier, Softmax is the bestused activation function. Though there are more activation functions known, these are known to be the most used activation functions.
Activation Functions and their Derivatives
Implementation using Python
Having learned the types and significance of each activation function, it is also essential to implement some basic (nonlinear) activation
functions using python code and observe the output for more clear understanding of the concepts:
Sigmoid Activation Function
import matplotlib.pyplot as plt import numpy as np def sigmoid(x): s=1/(1+np.exp(x)) ds=s*(1s) return s,ds x=np.arange(6,6,0.01) sigmoid(x) fig, ax = plt.subplots(figsize=(9, 5)) ax.spines['left'].set_position('center') ax.spines['right'].set_color('none') ax.spines['top'].set_color('none') ax.xaxis.set_ticks_position('bottom') ax.yaxis.set_ticks_position('left') ax.plot(x,sigmoid(x)[0], color="#307EC7", linewidth=3, label="sigmoid") ax.plot(x,sigmoid(x)[1], color="#9621E2", linewidth=3, label="derivative") ax.legend(loc="upper right", frameon=False) fig.show()
Observations:
 The sigmoid function has values between 0 to 1.
 The output is not zerocentered.
 Sigmoids saturate and kill gradients.
 At the top and bottom level of sigmoid functions, the curve changes slowly, the derivative curve above shows that the slope or gradient it is zero.
Tanh Activation Function
import matplotlib.pyplot as plt import numpy as np def tanh(x): t=(np.exp(x)np.exp(x))/(np.exp(x)+np.exp(x)) dt=1t**2 return t,dt z=np.arange(4,4,0.01) tanh(z)[0].size,tanh(z)[1].size fig, ax = plt.subplots(figsize=(9, 5)) ax.spines['left'].set_position('center') ax.spines['bottom'].set_position('center') ax.spines['right'].set_color('none') ax.spines['top'].set_color('none') ax.xaxis.set_ticks_position('bottom') ax.yaxis.set_ticks_position('left') ax.plot(z,tanh(z)[0], color="#307EC7", linewidth=3, label="tanh") ax.plot(z,tanh(z)[1], color="#9621E2", linewidth=3, label="derivative") ax.legend(loc="upper right", frameon=False) fig.show()
Observations:
 Its output is zerocentered because its range is between 1 to 1. i.e. 1 < output < 1.
 Optimization is easier in this method hence in practice it is always preferred over the Sigmoid function.
Pros and Cons of Activation Functions
Type of Function 
Pros 
Cons 
Linear 


Sigmoid 


Tanh 


ReLU 


Leaky ReLU 


ELU 


When all of this is said and done, the actual purpose of an activation function is to feature some reasonably nonlinear property to the function, which could be a neural network. A neural network, without the activation functions, might perform solely linear mappings from the inputs to the outputs, and also the mathematical operation throughout the forward propagation would be the dotproducts between an input vector and a weight matrix.
Since one dot product could be a linear operation, sequent dot products would be nothing more than multiple linear operations repeated one after another. And sequent linear operations may be thought of as mutually single learn operations. To be able to work out extremely attentiongrabbing stuff, the neural networks should be able to approximate the nonlinear relations from input features to the output labels.
The more complicated the information, the more nonlinear the mapping of features to the bottom truth label will usually be. If there is no activation function in a neural network, the network would in turn not be able to understand such complicated mappings mathematically and wouldn’t be able to solve tasks that the network is really meant to resolve.
The media shown in this article are not owned by Analytics Vidhya and is used at the Author’s discretion.