A Beginner’s Guide to Logistic Regression

Anshul Saini 05 Jan, 2024 • 13 min read

This article was published as a part of the Data Science Blogathon

Logistic Regression

Image Source: dataaspirant.com

Introduction

New to machine learning? Explore Logistic Regression with us, a beginner-friendly approach to predictive modeling. We’ll break down the basics, show you practical uses, and make it easy for you to apply in real-life situations. Let’s learn together!

Well, these were a few of my doubts when I was learning Logistic Regression. To find the math behind this, I plunged deeper into this topic only to find myself a better understanding of the Logistic Regression model. And in this article, I will try to answer all the doubts you are having right now on this topic. I will tell you the math behind this regression model.

What is Logistic Regression?

Logistic regression is the appropriate regression analysis to conduct when the dependent variable is dichotomous (binary). Like all regression analyses, logistic regression is a predictive analysis. It is used to describe data and to explain the relationship between one dependent binary variable and one or more nominal, ordinal, interval or ratio-level independent variables.

I found this definition on google and now we’ll try to understand it. Logistic Regression is another statistical analysis method borrowed by Machine Learning. It is used when our dependent variable is dichotomous or binary. It just means a variable that has only 2 outputs, for example, A person will survive this accident or not, The student will pass this exam or not. The outcome can either be yes or no (2 outputs). This regression technique is similar to linear regression and can be used to predict the Probabilities for classification problems.

Types of Logistic Regression

Here are the three main types of logistic regression:

Binary logistic regression

Binary logistic regression is used to predict the probability of a binary outcome, such as yes or no, true or false, or 0 or 1. For example, it could be used to predict whether a customer will churn or not, whether a patient has a disease or not, or whether a loan will be repaid or not.

Multinomial logistic regression

Multinomial logistic regression is used to predict the probability of one of three or more possible outcomes, such as the type of product a customer will buy, the rating a customer will give a product, or the political party a person will vote for.

Ordinal logistic regression

is used to predict the probability of an outcome that falls into a predetermined order, such as the level of customer satisfaction, the severity of a disease, or the stage of cancer.

Why do we use Logistic Regression rather than Linear Regression?

If you have this doubt, then you’re in the right place, my friend. After reading the definition of logistic regression we now know that it is only used when our dependent variable is binary and in linear regression this dependent variable is continuous.

The second problem is that if we add an outlier in our dataset, the best fit line in linear regression shifts to fit that point.

Now, if we use linear regression to find the best fit line which aims at minimizing the distance between the predicted value and actual value, the line will be like this:

Logistic Regression  over linear regression

Image Source:towardsdatascience.com

Here the threshold value is 0.5, which means if the value of h(x) is greater than 0.5 then we predict malignant tumor (1) and if it is less than 0.5 then we predict benign tumor (0). Everything seems okay here but now let’s change it a bit, we add some outliers in our dataset, now this best fit line will shift to that point. Hence the line will be somewhat like this:

Logistic Regression  greater than 1

Image Source:towardsdatascience.com

Do you see any problem here? The blue line represents the old threshold and the yellow line represents the new threshold which is maybe 0.2 here. To keep our predictions right we had to lower our threshold value. Hence we can say that linear regression is prone to outliers. Now here if h(x) is greater than 0.2 then only this regression will give correct outputs.

Another problem with linear regression is that the predicted values may be out of range. We know that probability can be between 0 and 1, but if we use linear regression this probability may exceed 1 or go below 0.

To overcome these problems we use Logistic Regression, which converts this straight best fit line in linear regression to an S-curve using the sigmoid function, which will always give values between 0 and 1. How does this work and what’s the math behind this will be covered in a later section?

If you want to know the difference between logistic regression and linear regression then you refer to this article.

How does Logistic Regression work?

Logistic regression works in the following steps:

  1. Prepare the data: The data should be in a format where each row represents a single observation and each column represents a different variable. The target variable (the variable you want to predict) should be binary (yes/no, true/false, 0/1).
  2. Train the model: We teach the model by showing it the training data. This involves finding the values of the model parameters that minimize the error in the training data.
  3. Evaluate the model: The model is evaluated on the held-out test data to assess its performance on unseen data.
  4. Use the model to make predictions: After the model has been trained and assessed, it can be used to forecast outcomes on new data.

Logistic Function

You must be wondering how logistic regression squeezes the output of linear regression between 0 and 1. If you haven’t read my article on Linear Regression then please have a look at it for a better understanding.

 Well, there’s a little bit of math included behind this and it is pretty interesting trust me.

Let’s start by mentioning the formula of logistic function:

Logistic Regression formula

How similar it is too linear regression? If you haven’t read my article on Linear Regression, then please have a look at it for a better understanding.

 We all know the equation of the best fit line in linear regression is:

fit linear regression

Let’s say instead of y we are taking probabilities (P). But there is an issue here, the value of (P) will exceed 1 or go below 0 and we know that range of Probability is (0-1). To overcome this issue we take “odds” of P:

odds a

Do you think we are done here? No, we are not. We know that odds can always be positive which means the range will always be (0,+∞ ). Odds are nothing but the ratio of the probability of success and probability of failure. Now the question comes out of so many other options to transform this why did we only take ‘odds’? Because odds are probably the easiest way to do this, that’s it.

The problem here is that the range is restricted and we don’t want a restricted range because if we do so then our correlation will decrease. By restricting the range we are actually decreasing the number of data points and of course, if we decrease our data points, our correlation will decrease. It is difficult to model a variable that has a restricted range. To control this we take the log of odds which has a range from (-∞,+).

log(p/1-p)

If you understood what I did here then you have done 80% of the maths. Now we just want a function of P because we want to predict probability right? not log of odds. To do so we will multiply by exponent on both sides and then solve for P.

logistic regression exponent
2nd exponent logistic regression
dividing

Now we have our logistic function, also called a sigmoid function. The graph of a sigmoid function is as shown below. It squeezes a straight line into an S-curve.

linear vs logistic regression

Image Source www.datacamp.com

Cost Function in Logistic Regression

In linear regression, we use the Mean squared error which was the difference between y_predicted and y_actual and this is derived from the maximum likelihood estimator. The graph of the cost function in linear regression is like this:

logistic regression cost function

Image Source: https://dchandra.com/

linear regression

In logistic regression Yi is a non-linear function (Ŷ=1​/1+ e-z). If we use this in the above MSE equation then it will give a non-convex graph with many local minima as shown

non-linear function

Image Source:towardsdatascience.com

The problem here is that this cost function will give results with local minima, which is a big problem because then we’ll miss out on our global minima and our error will increase.

In order to solve this problem, we derive a different cost function for logistic regression called log loss which is also derived from the maximum likelihood estimation method.

log loss logistic regression

In the next section, we’ll talk a little bit about the maximum likelihood estimator and what it is used for. We’ll also try to see the math behind this log loss function.

 

What is the use of Maximum Likelihood Estimator?

The primary objective of Maximum Likelihood Estimation (MLE) in machine learning, particularly in the context of logistic regression, is to identify parameter values that maximize the likelihood function. This function represents the joint probability density function (pdf) of our sample observations. In essence, it involves multiplying the conditional probabilities for observing each example given the distribution parameters. In the realm of logistic regression in machine learning, this process aims to discover parameter values such that, when plugged into the model for P(x), it produces a value close to one for individuals with a malignant tumor and close to zero for those with a benign tumor.

Let’s start by defining our likelihood function. We now know that the labels are binary which means they can be either yes/no or pass/fail etc. We can also say we have two outcomes success and failure. This means we can interpret each label as Bernoulli random variable.

A random experiment whose outcomes are of two types, success S and failure F, occurring with probabilities p and q respectively is called a Bernoulli trial. If for this experiment a random variable X is defined such that it takes value 1 when S occurs and 0 if F occurs, then X follows a Bernoulli Distribution.

sigmoid

Where P is our sigmoid function

sigmoid

where σ(θ^T*x^i) is the sigmoid function. Now for n observations,

n observations

We need a value for theta which will maximize this likelihood function. To make our calculations easier we multiply the log on both sides. The function we get is also called the log-likelihood function or sum of the log conditional probability

log likelihood

In machine learning, it is conventional to minimize a loss(error) function via gradient descent, rather than maximize an objective function via gradient ascent. If we maximize this above function then we’ll have to deal with gradient ascent to avoid this we take negative of this log so that we use gradient descent. We’ll talk more about gradient descent in a later section and then you’ll have more clarity. Also, remember,

max[log(x)] = min[-log(x)]

The negative of this function is our cost function and what do we want with our cost function? That it should have a minimum value. It is common practice to minimize a cost function for optimization problems; therefore, we can invert the function so that we minimize the negative log-likelihood (NLL). So in logistic regression, our cost function is:

cost function

Here y represents the actual class and log(σ(θ^T*x^i) ) is the probability of that class.

  • p(y) is the probability of 1.
  • 1-p(y) is the probability of 0.

Let’s see what will be the graph of cost function when y=1 and y=0

y=1 and y=0
Image Source: https://medium.com/

If we combine both the graphs, we will get a convex graph with only 1 local minimum and now it’ll be easy to use gradient descent here.

The red line here represents the 1 class (y=1), the right term of cost function will vanish. Now if the predicted probability is close to 1 then our loss will be less and when probability approaches 0, our loss function reaches infinity.

The black line represents 0 class (y=0), the left term will vanish in our cost function and if the predicted probability is close to 0 then our loss function will be less but if our probability approaches 1 then our loss function reaches infinity.

cost theta

This cost function is also called log loss. It also ensures that as the probability of the correct answer is maximized, the probability of the incorrect answer is minimized. Lower the value of this cost function higher will be the accuracy.

Gradient Descent Optimization

In this section, we will try to understand how we can utilize Gradient Descent to compute the minimum cost.

Gradient descent changes the value of our weights in such a way that it always converges to minimum point or we can also say that, it aims at finding the optimal weights which minimize the loss function of our model. It is an iterative method that finds the minimum of a function by figuring out the slope at a random point and then moving in the opposite direction.

Gradient Descent Optimization, Logistic Regression
Image Source: www.analyticsvidhya.com/

The intuition is that if you are hiking in a canyon and trying to descend most quickly down to the river at the bottom, you might look around yourself 360 degrees, find the direction where the ground is sloping the steepest, and walk downhill in that direction.

At first gradient descent takes a random value of our parameters from our function. Now we need an algorithm that will tell us whether at the next iteration we should move left or right to reach the minimum point. The gradient descent algorithm finds the slope of the loss function at that particular point and then in the next iteration, it moves in the opposite direction to reach the minima. Since we have a convex graph now we don’t need to worry about local minima. A convex curve will always have only 1 minima.

We can summarize the gradient descent algorithm as:

gradient descent algorithm

Here alpha is known as the learning rate. It determines the step size at each iteration while moving towards the minimum point. Usually, a lower value of “alpha” is preferred, because if the learning rate is a big number then we may miss the minimum point and keep on oscillating in the convex curve

Now the question is what is this derivative of cost function? How do we do this? Don’t worry, In the next section we’ll see how we can derive this cost function w.r.t our parameters.

Derivation of Cost Function:

Before we derive our cost function we’ll first find a derivative for our sigmoid function because it will be used in derivating the cost function.

Derivation of Cost Function
Derivation of Cost Function 2

Now, we will derive the cost function with the help of the chain rule as it allows us to calculate complex partial derivatives by breaking them down.

Step-1: Use chain rule and break the partial derivative of log-likelihood.

Use chain rule and break the partial derivative of log-likelihood

Step-2: Find derivative of log-likelihood w.r.t p

Find derivative of log-likelihood w.r.t p

Step-3: Find derivative of ‘p’ w.r.t ‘z’

Step-3: Find derivative of 'p' w.r.t 'z'

Step-4: Find derivate of z w.r.t θ

Step-4: Find derivate of z w.r.t θ

Step-5: Put all the derivatives in equation 1

Step-5: Put all the derivatives in equation 1

 

Step-5: Put all the derivatives in equation 1

Hence the derivative of our cost function is:

Step-5: Put all the derivatives in equation 1

Now since we have our derivative of the cost function, we can write our gradient descent algorithm as:

If the slope is negative (downward slope) then our gradient descent will add some value to our new value of the parameter directing it towards the minimum point of the convex curve. Whereas if the slope is positive (upward slope) the gradient descent will minus some value to direct it towards the minimum point.

Conclusion

To summarize, in this article, we explored the limitations of linear regression in addressing classification problems. Naturally, we delved into the application of Maximum Likelihood Estimation (MLE) in logistic regression and derived the associated cost function. In the upcoming article, we will comprehensively discuss the interpretations of logistic regression in machine learning and explore methods to assess the accuracy of our logistic model.

In the next article, I will explain all the interpretations of logistic regression. And how we can check the accuracy of our logistic model.

Let me know if you have any queries in the comments below.

Frequently Asked Questions

Q1. What is logistic regression in simple terms?

A. Logistic regression is a statistical method for binary classification. It models the relationship between a dependent binary variable (like yes/no or 1/0) and one or more independent variables by estimating the probability of the binary outcome. It uses a logistic function to transform linear combinations of the independent variables, making it suitable for predicting probabilities and classifying data into two categories based on a threshold.

Q2. What is the main advantage of logistic regression?

The main advantage of logistic regression is that it is simple to understand and interpret. It is also a very efficient algorithm, which means that it can be trained on large datasets relatively quickly. Additionally, logistic regression is a very flexible algorithm that can be used to model a wide variety of relationships between variables.

Q3. What is better than logistic regression?

There are a number of machine learning algorithms that can outperform logistic regression on certain tasks. For example, random forests and gradient-boosting machines can often achieve higher accuracy on classification tasks. However, logistic regression is still a very popular algorithm due to its simplicity, interpretability, and efficiency.

Q4.Why is it called logistic regression?

Logistic regression is called logistic regression because it uses a logistic function to transform the output of the linear function into a probability value. The logistic function is a non-linear function that is shaped like an S-curve. It has a range of 0 to 1, which makes it ideal for modeling probabilities.

The media shown in this article are not owned by Analytics Vidhya and are used at the Author’s discretion.

Anshul Saini 05 Jan 2024

I am an undergraduate student currently in my last year majoring in Statistics (Bachelors of Statistics) and have a strong interest in the field of data science, machine learning, and artificial intelligence. I enjoy diving into data to discover trends and other valuable insights about the data. I am constantly learning and motivated to try new things.

Frequently Asked Questions

Lorem ipsum dolor sit amet, consectetur adipiscing elit,

Responses From Readers

Clear

Emmanuel Asiamah
Emmanuel Asiamah 03 Dec, 2021

Great presentation, very precise and concise with relevant examples. Kudos!

Anurag Tomar
Anurag Tomar 30 Jul, 2022

The best article on logisitic regression, explained everything from the very basic

Ken
Ken 22 Sep, 2022

This is a really good write up and I enjoyed using this to review. I noticed a typo in step 5 of deriving the log-likelihood in the second line. It says sigmoid(1-(z)) but it should say (1-sigmoid(z)) which is how you get 1-p on the next line

Machine Learning
Become a full stack data scientist

  • [tta_listen_btn class="listen"]