*This article was published as a part of theÂ Data Science Blogathon*

Machine learning creates static models from historical data. But, once deployed in production, ML models become unreliable and obsolete and degrade with time. There might be changes in the data distribution in production, thus causing biased predictions. User behavior itself might have changed compared to the baseline data the model was trained on, or there might be additional factors in real-world interactions which would have impacted the predictions. Data drift is a major reason model accuracy decreases over time.

Thus, monitoring the changes continuously in our modelâ€™s behavior is of utmost importance. Flagging such drifts and automating certain jobs for retraining the model with new data or manual intervention of any kind ensures that the model remains relevant in production and gives fair and unbiased predictions over time.

Concept drift means that the statistical properties of the target variable, which the model is trying to predict, change over time. This causes problems because the predictions become less accurate and become unreliable.

**Example:**

The abrupt changes in consumer behavior brought on by COVID-19 had a major impact on the accuracy of forecasting models that rely on historical data to inform their predictions. This can be treated as an example of concept drift.

One of the main reasons for concept drift to occur is the non-stationarity of data i.e., change in statistical properties of data with time.

Image source: https://arxiv.org/pdf/2004.05785.pdf

**2) Covariate Drift**

Covariate shift is the change in the distribution of one or more of the independent variables or input variables of the dataset. This means that even though the relationship between feature and target variable remains unchanged, the distribution of the feature itself has changed. When statistical properties of this input data change, the same model which has been built before will not provide unbiased results. This leads to inaccurate predictions.

**Example**: Suppose a model is trained with a salary variable that ranges from 200$ to 300$ and is in production. Over time, salary increases and the model encounters real-time data with higher salary figures of 1000$,1200$, and so on. And the model will see an increase in mean and variance, and therefore it leads to a data drift.

Image source: https://arxiv.org/pdf/2004.05785.pdf

**Stage 1 (Data Retrieval)** is used to retrieve data from data streams in chunks since a single data point cannot carry enough information to infer the overall distribution.

**Stage 2 (Data Modeling)** is used to extract the key features, that is, the features of the data that most impact a system if they drift.

**Stage 3 (Test Statistics Calculation)** is to measure the drift and calculate test statistics for the hypothesis test.

**Stage 4 (Hypothesis Test)** is used to evaluate the statistical significance of the change observed in Stage 3 or the p-value.

All the methods for detecting data drift are lagging indicators of drift. Only after they have processed enough data after any kind of drift that has occurred, that the actual drift is detected.

**1) Kolmogorov-Smirnov (K-S) test:**

The K-S test is a nonparametric test that compares the cumulative distributions of two data sets, in this case, the training data and the post-training data. The null hypothesis for this test states that the data distributions from both the datasets are same. If the null is rejected then we can conclude that there is adrift in the model.

In our analysis, we have only considered numerical columns for the test.

For generating our final Data Drift analysis, the chi-squared test can be applied for the categorical features to identify data drift.

Python implementation:

df.drop(['RowNumber','CustomerId','Surname'],axis=1,inplace=True) df_numerical=df.iloc[:,[3,4,5,9]] df_numerical.head()

df_salary_low=df_numerical[df_numerical['EstimatedSalary']<=10000] #splitting the data to analyze the difference in both the datasets

df_salary_high=df_numerical[df_numerical[‘EstimatedSalary’]>10000]

from scipy import stats p_value = 0.05 rejected = 0 for col in df_numerical.columns: test = stats.ks_2samp(df_salary_low[col], df_salary_high[col]) if test[1] < p_value: rejected += 1 print("Column rejected", col) print("We rejected",rejected,"columns in total")

Thus, the K-S test has rejected the Tenure and Estimated Salary columns which means that the statistical properties of these two columns for both the datasets are not identical.

**2) Population Stability Index:**

It compares the distribution of the target variable in the test dataset to a training data set that was used to develop the model.

Steps for calculation:

1) Divide the expected (test) dataset and the actual (training dataset) into buckets and define the boundary values of the buckets based on the minimum and maximum values of that column in train data.

2) Calculate the % of observations in each bucket for both expected and actual datasets.

3) Calculate the PSI as given in the formula

**a) When PSI<=1**

This means there is no change or shift in the distributions of both datasets.

**b) 0.1< PSI<0.2**

This indicates a slight change or shift has occurred.

**c) PSI>0.2**

This indicates a large shift in the distribution has occurred between both datasets.

def calculate_psi(expected, actual, buckettype='bins', buckets=10, axis=0):

def psi(expected_array, actual_array, buckets): def scale_range (input, min, max): input += -(np.min(input)) input /= np.max(input) / (max - min) input += min return input

breakpoints = np.arange(0, buckets + 1) / (buckets) * 100 breakpoints = scale_range(breakpoints, np.min(expected_array), np.max(expected_array)) expected_percents = np.histogram(expected_array, breakpoints)[0] / len(expected_array) actual_percents = np.histogram(actual_array, breakpoints)[0] / len(actual_array) def sub_psi(e_perc, a_perc): if a_perc == 0: a_perc = 0.0001 if e_perc == 0: e_perc = 0.0001

value = (e_perc - a_perc) * np.log(e_perc / a_perc) return(value)

psi_value = np.sum(sub_psi(expected_percents[i], actual_percents[i])

for i in range(0, len(expected_percents)))

return(psi_value)

if len(expected.shape) == 1: psi_values = np.empty(len(expected.shape)) else: psi_values = np.empty(expected.shape[axis])

for i in range(0, len(psi_values)): psi_values = psi(expected, actual, buckets)

return(psi_values)

## Calculate psi for features psi_list = [] top_feature_list=df_salary_high.columns for feature in top_feature_list: # Assuming you have a validation and training set psi_t = calculate_psi(df_salary_high[feature], df_salary_low[feature]) psi_list.append(psi_t) print('Stability index for column ',feature,'is',psi_t)

**3) Model-Based Approach**

A Machine Learning-based model approach can also be used to detect data drift between two populations.

We need to label our data which has been used to build the current model in production as 0 and the real-time data gets labeled as 1. We now have to build a model and evaluate the results.

If the model gives high accuracy, it means that it can easily discriminate between the two sets of data. Thus, we could conclude that a covariate shift has occurred and the model will need to be recalibrated. On the other hand, if the model accuracy is around 0.5, it means that it is as good as a random guess. This means that a significant data shift has not occurred and we can continue to use the model.

The disadvantage of this model is that every time new input data is made available, the training and testing process needs to be repeated which can become computationally expensive.

**4) Using specialized drift detection techniques such as** **Adaptive Windowing (ADWIN)**:

The Adaptive Windowing (ADWIN) algorithm uses a sliding window approach to detect concept drift. Window size is fixed and ADWIN slides the fixed window for detecting any change on the newly arriving data. When two sub-windows show distinct means in the new observations the older sub-window is dropped.

A user-defined threshold is set to trigger a warning that drift is detected. If the absolute difference between the two means derived from two sub-windows exceeds the pre-defined threshold, an alarm is generated. This method is applicable for univariate data.

from skmultiflow.drift_detection import ADWIN adwin = ADWIN() for col in df_numerical.columns: data_stream=[] a = np.array(df_salary_low[col]) b = np.array(df_salary_high[col]) data_stream = np.concatenate((a,b)) # Adding stream elements to ADWIN and verifying if drift occurred for i in range(len(data_stream)): adwin.add_element(data_stream[i]) if adwin.detected_change(): print('Change detected in data: ' + str(data_stream[i]) + ' - at index: ' + str(i) +'for column:' + col)

**5) Page-Hinkley method**:

This drift detection method calculates the mean of the observed values and keeps updating the mean as and when new data arrives. A drift is detected if the observed mean at some instant is greater than a threshold value lambda.

min_instances â€“ defaults to 30

The minimum number of instances before detecting change.

delta â€“ defaults to 0.005

The delta factor for the Page Hinkley test.

threshold â€“ defaults to 50

The change detection threshold (lambda).

alpha â€“ defaults to 0.9999

The forgetting factor is used to weigh the observed value and the mean.

from river.drift import PageHinkley np.random.seed(12345) ph = PageHinkley(threshold=10,min_instances=10) # Update drift detector and verify if change is detected for col in df_numerical.columns: data_stream=[] a = np.array(df_salary_low[col]) b = np.array(df_salary_high[col]) data_stream = np.concatenate((a,b)) for i, val in enumerate(data_stream): in_drift, in_warning = ph.update(val) if in_drift: print(f"Change detected at index {i} for column: {col} with input value: {val}")

In production, there are multiple ways to respond to data drift.

Some of the methods which are generally followed in the industry are:

**1) Blindly update model:**

This is a naÃ¯ve approach. There is no proactive drift detection. Models are periodically retrained and updated with recent data. Without drift detection in place, it is difficult to estimate the time interval for re-training and model re-deployment.

**2) Training with weighted data:**

When a new model is trained instead of discarding old training data, use weight inversely proportional to the age of data.

**3) Incremental learning:**

As new data arrives, the models are continuously retrained and updated. As a result, the model is always adapting to the changes in the data distribution. This approach will work with machine learning models which allow incremental learning one instance of data at a time.

There are various ways to detect and handle drift. Custom alerts and thresholds can be also set up by the user to trigger alerts for drift. In Cloud platforms e.g in Azure Machine Learning, you can use dataset monitors to detect and alert for data drift.

Thus, Model Monitoring and Drift Detection is an important part of the ML Model Lifecycle which needs to be optimized for successful and efficient deployments of models into production. Identifying any kind of drifts in the data in real-time and a proper strategy to handle such drifts is very crucial for our models to give better results with time.

Lorem ipsum dolor sit amet, consectetur adipiscing elit,

Become a full stack data scientist##

##

##

##

##

##

##

##

##

##

##

##

##

##

##

##

##

##

##

##

##

##

##

##

##

##

##

Understanding Cost Function
Understanding Gradient Descent
Math Behind Gradient Descent
Assumptions of Linear Regression
Implement Linear Regression from Scratch
Train Linear Regression in Python
Implementing Linear Regression in R
Diagnosing Residual Plots in Linear Regression Models
Generalized Linear Models
Introduction to Logistic Regression
Odds Ratio
Implementing Logistic Regression from Scratch
Introduction to Scikit-learn in Python
Train Logistic Regression in python
Multiclass using Logistic Regression
How to use Multinomial and Ordinal Logistic Regression in R ?
Challenges with Linear Regression
Introduction to Regularisation
Implementing Regularisation
Ridge Regression
Lasso Regression

Introduction to Stacking
Implementing Stacking
Variants of Stacking
Implementing Variants of Stacking
Introduction to Blending
Bootstrap Sampling
Introduction to Random Sampling
Hyper-parameters of Random Forest
Implementing Random Forest
Out-of-Bag (OOB) Score in the Random Forest
IPL Team Win Prediction Project Using Machine Learning
Introduction to Boosting
Gradient Boosting Algorithm
Math behind GBM
Implementing GBM in python
Regularized Greedy Forests
Extreme Gradient Boosting
Implementing XGBM in python
Tuning Hyperparameters of XGBoost in Python
Implement XGBM in R/H2O
Adaptive Boosting
Implementing Adaptive Boosing
LightGBM
Implementing LightGBM in Python
Catboost
Implementing Catboost in Python

Introduction to Clustering
Applications of Clustering
Evaluation Metrics for Clustering
Understanding K-Means
Implementation of K-Means in Python
Implementation of K-Means in R
Choosing Right Value for K
Profiling Market Segments using K-Means Clustering
Hierarchical Clustering
Implementation of Hierarchial Clustering
DBSCAN
Defining Similarity between clusters
Build Better and Accurate Clusters with Gaussian Mixture Models

Introduction to Machine Learning Interpretability
Framework and Interpretable Models
model Agnostic Methods for Interpretability
Implementing Interpretable Model
Understanding SHAP
Out-of-Core ML
Introduction to Interpretable Machine Learning Models
Model Agnostic Methods for Interpretability
Game Theory & Shapley Values

Deploying Machine Learning Model using Streamlit
Deploying ML Models in Docker
Deploy Using Streamlit
Deploy on Heroku
Deploy Using Netlify
Introduction to Amazon Sagemaker
Setting up Amazon SageMaker
Using SageMaker Endpoint to Generate Inference
Deploy on Microsoft Azure Cloud
Introduction to Flask for Model
Deploying ML model using Flask

nice article can you share the code . code is nit arrange in proper way ?

Hi Thanks for the article. I have a doubt about when the model is retrained - I am working on a computer vision project. For eg. we have identified drift in the production data and have got 30 different images varied from the baseline data. While retraining is one of the option - we can train the model with the new 30 images.We should be updating the Baseline data as well right?