Power of Bayesian Statistics & Probability | Data Analysis (Updated 2023)

NSS 12 May, 2023 • 14 min read

Introduction

Bayesian Statistics (bayesian probability) continues to remain one of the most powerful things in the ignited minds of many statisticians. In several situations, it does help us solve business problems, even when there is data involved in these problems. To say the least, knowledge of statistics will allow you to work on complex data analysis problems in machine learning and data science, irrespective of the size of the data.

In the 1770s, Thomas Bayes introduced the ‘Bayes Theorem.’ Even centuries later, the importance of ‘Bayesian Statistics’ hasn’t faded away. In this beginner’s guide on Bayesian Statistics, I’ve tried to explain the concepts in a simplistic manner with examples. Prior knowledge of basic probability & statistics is desirable. You should check out this course to get a comprehensive low down on statistics and probability. By the end of this article, you will have a concrete understanding of Bayesian Statistics and its associated concepts.

Learning Objectives

  • Discover Bayesian Statistics and Bayesian Inference; Bayesian Statistics Example.
  • Learn the drawbacks of frequentist statistics and how it leads to the need for Bayesian Statistics.
  • Understand the methods to test the significance of the model, like p-value, confidence interval, etc.
bayesian statistics, probability

What Is Frequentist Statistics?

The debate between frequentist and bayesian have haunted beginners for centuries. Therefore, it is important to understand the difference between the two and how there exists a thin line of demarcation!

It is the most widely used statistical inference technique in the statistical world. In fact, generally, it is the first school of thought that a person entering the world of statistics comes across.

Frequentist Statistics tests whether an event (hypothesis) occurs or not. It calculates the probability of an event in the long run of the experiment (i.e., the experiment is repeated under the same conditions to obtain the outcome).

Here, the sampling distributions of fixed size are taken. Then, the experiment is theoretically repeated an infinite number of times but practically done with a stopping intention. For example, I perform an experiment with a stopping intention in mind that I will stop the experiment when it is repeated 1000 times, or I see a minimum of 300 heads in a coin toss.

Let’s go deeper now.

Now, we’ll understand frequentist statistics using an example of a coin toss. The objective is to estimate the fairness of the coin. Below is a table representing the frequency of heads:

frequentist vs bayesian, bayesian statistics, example

We know that the probability of getting a head, on tossing a fair coin is 0.5. No. of heads represents the actual number of heads obtained. Difference is the difference between 0.5*(No. of tosses) - no. of heads.

The important thing to note is that, though the difference between the actual number of heads and the expected number of heads( 50% of the number of tosses) increases as the number of tosses are increased, the proportion of the number of heads to the total number of tosses approaches 0.5 (for a fair coin).

This experiment presents us with a very common flaw found in the frequentist approach, i.e., Dependence of the result of an experiment on the number of times the experiment is repeated. To know more about frequentist statistical methods, you can head to this excellent course on inferential statistics.

Inherent Flaws in Frequentist Statistics

Till here, we’ve seen just one flaw in frequentist statistics. Well, it’s just the beginning.

The 20th century saw a massive upsurge in the frequentist statistics being applied to numerical models to check whether one sample is different from the other, whether a parameter is important enough to be kept in the model, and various other manifestations of hypothesis testing. But frequentist statistics suffered some great flaws in its design and interpretation, which posed a serious concern in all real-life problems. For example:

1. p-values measured against a sample (fixed size) statistic with some stopping intention changes with change in intention and sample size. i.e., If two persons work on the same dataset and have different stopping intentions, they may get two different  p- values for the same dataset, which is undesirable.

For example, Person A may choose to stop tossing a coin when the total count reaches 100, while B stops at 1000. For different sample sizes, we get different t-scores and different p-values. Similarly, the intention to stop may change from a fixed number of flips to the total duration of flipping. In this case, too, we are bound to get different p-values.

2. Confidence Interval (C.I) like p-value depends heavily on the sample size. This makes the stopping potential absolutely absurd since no matter how many persons perform the tests on the same data, the results should be consistent.

3. Confidence Intervals (C.I) are not probability distributions; therefore, they do not provide the most probable value for a parameter and the most probable values.

These three reasons are enough to get you going into thinking about the drawbacks of the frequentist approach and why there is a need for the bayesian approach. Let’s find it out.

From here, we’ll first understand the basics of Bayesian Statistics.

What Is Bayesian Statistics?

Bayesian statistics is a statistical approach that utilizes Bayes’ theorem for data analysis and parameter estimation. What sets Bayesian statistics apart is that all observed and unobserved parameters in a statistical model are assigned a joint probability distribution, known as the prior and data distributions. Bayesian inference is a statistical inference method that uses Bayes’ theorem to revise the probability of a hypothesis as new evidence or information is obtained. Bayesian inference is a crucial statistical technique, particularly in mathematical statistics.

“Bayesian statistics is a mathematical procedure that applies probabilities to statistical problems. It provides people with the tools to update their beliefs in the evidence of new data.”

Did you get that? Let me explain it with an example:

Suppose, out of all the 4 championship races (F1) between Niki Lauda and James Hunt, Niki won 3 times while James managed only 1.

So, if you were to bet on the winner of the next race, who would he be?

I bet you would say Niki Lauda.

Here’s the twist. What if you are told that it rained once when James won and once when Niki won, and it is definite that it will rain on the next date? So, who would you bet your money on now?

By intuition, it is easy to see that the chances of winning for James have increased drastically. But the question is: by how much?

To understand this problem, we need to become familiar with some concepts, the first of which is the conditional probability (explained below).

In addition, there are certain pre-requisites:

Pre-Requisites:

  1. Linear Algebra: To refresh your basics, you can check out Khan’s Academy Algebra.
  2. Probability and Basic Statistics: To refresh your basics, you can check out another course by Khan Academy.

Conditional Probability

It is defined as the: Probability of an event A given B equals the probability of B and A happening together divided by the probability of B.”

For example: assume two partially intersecting sets, A and B, as shown below.

Set A represents one set of events, and Set B represents another. We wish to calculate the probability of A given B has already happened. Let’s represent the happening of event B by shading it with red.

conditional probability | bayesian statistics

Now since B has happened, the part which now matters for A is the part shaded in blue which is interestingly CodeCogsEqn. So, the probability of A given B turns out to be:

conditional probability formula | bayesian statistics

Therefore, we can write the formula for event B given A has already occurred by:

Formula for conditional probability | bayesian statistics

or
Formula for conditional probability | bayesian statistics

Now, the second equation can be rewritten as:

Formula for conditional probability | bayesian statistics

This is known as Conditional Probability.

Let’s try to answer a betting problem with this technique.

Suppose B is the event of James Hunt winning and A is the event of rain. Therefore,

  1. P(A) = 1/2, since it rained twice out of four days.
  2. P(B) is 1/4, since James won only one race out of four.
  3. P(A|B) = 1, since it rained every time when James won.

Substituting the values in the conditional probability formula, we get the probability to be around 50%, which is almost the double of 25% when rain was not taken into account (Solve it at your end).

This further strengthened our belief that James would win in the light of new evidence, i.e., rain. You must be wondering that this formula closely resembles something you might have heard a lot about. Think!

Probably, you guessed it right. It looks like Bayes’ Theorem.

Bayes theorem is built on top of conditional probability and lies at the heart of Bayesian Inference. Let’s understand it in detail now.

Bayes Theorem

Bayes Theorem comes into effect when multiple events form an exhaustive set with another event B. This could be understood with the help of the below diagram.

bayes theorem, probability | bayesian statistics

Now, B can be written as

probability formula for mutually exclusive events | bayesian statistics

So, the probability of B can be written as,

probability of mutually exclusive outcomes | bayesian statistics

Butmultiplication rule, probability | bayesian statistics

So, by replacing P(B) in the equation of conditional probability, we get

bayes theorem, conditional probability formula | bayesian statistics

This is the equation of Bayes Theorem.

What Is Bayesian Inference?

There is no point in diving into the theoretical aspect of it. So, we’ll learn how it works! Let’s take an example of coin tossing to understand the idea behind Bayesian inference.

An important part of bayesian inference is the establishment of parameters and models.

Models are the mathematical formulation of observed events. Parameters are the factors in the models affecting the observed data. For example, in tossing a coin, the fairness of the coin may be defined as the parameter of the coin denoted by θ. The outcome of the events may be denoted by D.

Answer this now. What is the probability of 4 heads out of 9 tosses(D), given the fairness of the coin (θ) i.e P(D|θ)?

Wait, did I ask the right question? No.

We should be more interested in knowing: Given an outcome (D), what is the probability of the coin being fair (θ=0.5)

Let’s represent it using the Bayes rule:

P(θ|D)=(P(D|θ) X P(θ))/P(D)

Here, P(θ)is the prior, i.e., the strength of our belief in the fairness of the coin before the toss. It is perfectly okay to believe that coin can have any degree of fairness between 0 and 1.

P(D|θ) is the likelihood of observing our result given our distribution for θ. If we knew that coin was fair, this gives the probability of observing the number of heads in a particular number of flips.

P(D) is the evidence. This is the probability of data as determined by summing (or integrating) across all possible values of θ, weighted by how strongly we believe in those particular values of θ.

If we had multiple views of what the fairness of the coin is (but didn’t know for sure), then this tells us the probability of seeing a certain sequence of flips for all possibilities of our belief in the coin’s fairness.
P(θ|D) is the posterior belief of our parameters after observing the evidence i.e. the number of heads.

From here, we’ll dive deeper into the mathematical implications of this concept. Don’t worry. Once you understand them, getting to their mathematics is pretty easy.

To define our model correctly, we need two mathematical models beforehand. One represents the likelihood function P(D|θ), and the other for representing the distribution of prior beliefs. The product of these two gives the posterior belief P(θ|D) distribution.

Since prior and posterior are both beliefs about the distribution of fairness of coin, intuition tells us that both should have the same mathematical form. Keep this in mind. We will come back to it again.

So, there are several functions that support the existence of bayes theorem. Knowing them is important in bayesian data analysis; hence I have explained them in detail.

Bernoulli Likelihood Function

Let’s recap what we learned about the likelihood function. So, we learned that:

It is the probability of observing a particular number of heads in a particular number of flips for a given fairness of coin. This means our probability of observing heads/tails depends upon the fairness of the coin (θ).
P(y=1|θ)= [If coin is fair θ=0.5, probability of observing heads (y=1) is 0.5]

P(y=0|θ)= [If coin is fair θ=0.5, probability of observing tails(y=0) is 0.5]

It is worth noticing that representing 1 as heads and 0 as tails is just a mathematical notation to formulate a model. We can combine the above mathematical definitions into a single definition to represent the probability of both outcomes.

P(y|θ) =

This is called the Bernoulli Likelihood Function, and the task of coin flipping is called Bernoulli’s trials.

y={0,1},θ=(0,1)

And, when we want to see a series of heads or flips, its probability is given by:

bernoulli likelihood function
bernoulli likelihood function

Furthermore, if we are interested in the probability of the number of heads z turning up in N number of flips, then the probability is given by:

bernoulli likelihood function

Prior Belief Distribution

This distribution is used to represent our strengths in beliefs about the parameters based on previous experiences. But what if one has no previous experience?

Don’t worry. Mathematicians have devised methods to mitigate this problem too. It is known as uninformative priors. I would like to inform you beforehand that it is just a misnomer. Every uninformative prior always provides some information event the constant distribution prior.

Well, the mathematical function used to represent the prior beliefs is known as beta distributionIt has some very nice mathematical properties which enable us to model our beliefs about a binomial distribution.

The probability density function of the beta distribution is of the form:

beta distribution, pdf, probability density function

where our focus stays on the numerator. The denominator is there just to ensure that the total probability density function upon integration evaluates to 1.

α and β are called the shape-deciding parameters of the density function. Here α is analogous to the number of heads in the trials and β corresponds to the number of tails. The diagrams below will help you visualize the beta distributions for different values of α and β
beta-binomial model | bayesian statistics

You, too, can draw the beta distribution for yourself using the following code in R:

> library(stats)
> par(mfrow=c(3,2))
> x=seq(0,1,by=o.1)
> alpha=c(0,2,10,20,50,500)
> beta=c(0,2,8,11,27,232)
> for(i in 1:length(alpha)){
       y<-dbeta(x,shape1=alpha[i],shape2=beta[i])
       plot(x,y,type="l")
}
Note: α and β are intuitive to understand since they can be calculated by knowing the mean (μ) and standard deviation (σ) of the distribution. In fact, they are related as:

Calculation of mean in bayesian statistics
Standard deviation formula in bayesian statistics

If the mean and standard deviation of a distribution are known, then their shape parameters can be easily calculated.

Here are the inferences drawn from the graphs above:

  1. When there was no toss, we believed that every fairness of coin was possible, as depicted by the flat line.
  2. When there was more number of heads than tails, the graph showed a peak shifted towards the right side, indicating a higher probability of heads, and that coin is not fair.
  3. As more tosses are done, and heads continue to come in larger proportion, the peak narrows, increasing our confidence in the fairness of the coin value.

Posterior Belief Distribution

The reason that we chose prior belief is to obtain a beta distribution. This is because when we multiply it with a likelihood function, the posterior distribution yields a form similar to the prior distribution, which is much easier to relate to and understand. If this much information whets your appetite, I’m sure you are ready to walk the extra mile.

Let’s calculate posterior belief using bayes theorem.

Calculating posterior belief using Bayes Theorem
Posterior belief formula | bayesian statistics
posterior belief, bayes theorem
posterior belief, bayes theorem

Now, our posterior belief becomes,

posterior belief | bayesian statistics

This is interesting. Just knowing the mean and standard distribution of our belief about the parameter θ and by observing the number of heads in N flips, we can update our belief about the model parameter(θ).

Let’s understand this with the help of a simple example:

Suppose you think that a coin is biased. It has a mean (μ) bias of around 0.6 with a standard deviation of 0.1.

Then,

α= 13.8β=9.2

i.e, our distribution will be biased on the right side. Suppose you observed 80 heads (z=80) in 100 flips(N=100). Let’s see how our prior and posterior beliefs are going to look:

prior = P(θ|α,β)=P(θ|13.8,9.2)
Posterior = P(θ|z+α,N-z+β)=P(θ|93.8,29.2)

Let’s visualize both the beliefs on a graph:

prior, posterior

The R code for the above graph is as follows:

> library(stats)
> x=seq(0,1,by=0.1)
> alpha=c(13.8,93.8)
> beta=c(9.2,29.2)
for(i in 1:length(alpha)){
      y<-dbeta(x,shape1=alpha[i],shape2=beta[i])
      plot(x,y,type="l",xlab = "theta",ylab = "density")
}

As more and more flips are made, and new data is observed, our beliefs get updated. This is the real power of Bayesian Inference.

Test for Significance – Frequentist vs. Bayesian

Without going into the rigorous mathematical structures, this section will provide you with a quick overview of different approaches of frequentist and bayesian methods to test for significance and difference between groups and determine which method is most reliable.

p-value

In this, the t-score for a particular sample from a sampling distribution of fixed size is calculated. Then, p-values are predicted. We can interpret p values as (taking an example of the p-value as 0.02 for a distribution of mean 100): There is a 2% probability that the sample will have a mean equal to 100.

This interpretation suffers from the flaw that for sampling distributions of different sizes, one is bound to get different t-score and hence different p-value. It is completely absurd. A p-value less than 5% does not guarantee that the null hypothesis is wrong, nor does a p-value greater than 5% ensure that the null hypothesis is right.

Confidence Intervals

Confidence Intervals also suffer from the same defect. Moreover, since C.I is not a probability distribution there is no way to know which values are most probable. So, Credible Interval is used with regard to Bayes theorem.

Bayes Factor

Bayes factor is the equivalent of the p-value in the bayesian framework. Let’s understand it in a comprehensive manner.

The null hypothesis in the bayesian framework assumes ∞ probability distribution only at a particular value of a parameter (say θ=0.5) and a zero probability elsewhere. (M1)

The alternative hypothesis is that all values of θ are possible, hence a flat curve representing the distribution. (M2)

Now, the posterior distribution of the new data looks like the one below.

significance, bayes factor, hypothesis testing | bayesian statistics

Bayesian statistics adjusted the credibility (probability) of various values of θ. It can be easily seen that the probability distribution has shifted towards M2 with a value higher than M1, i.e., M2 is more likely to happen.

Bayes factor does not depend upon the actual distribution values of θ but the magnitude of the shift in values of M1 and M2.

In panel A (shown above): the left bar (M1) is the prior probability of the null hypothesis.

In panel B (shown), the left bar is the posterior probability of the null hypothesis.

Bayes factor is defined as the ratio of the posterior odds to the prior odds,

Bayes factor formula | bayesian statistics

To reject a null hypothesis, a BF <1/10 is preferred.

We can see the immediate benefits of using the Bayes Factor instead of p-values since they are independent of intentions and sample size.

To reject a null hypothesis, a BF <1/10 is preferred.

We can see the immediate benefits of using the Bayes Factor instead of p-values since they are independent of intentions and sample size.

High-Density Interval (HDI)

HDI is formed from the posterior distribution after observing the new data. Since HDI is a probability, the 95% HDI gives the 95% most credible values. It is also guaranteed that 95 % of values will lie in this interval, unlike C.I.

Notice how the 95% HDI in the prior distribution is wider than the 95% posterior distribution. This is because our belief in HDI increases upon observation of new data.

significance, hdi, high density interval | bayesian statistics

Conclusion

The aim of this tutorial was to get you thinking about the different types of statistical philosophies out there and how just one of them cannot be used in every situation. It’s high time that both philosophies are merged to mitigate real-world problems by addressing the flaws of the other. Part II of this series will focus on the Dimensionality Reduction techniques using MCMC (Markov Chain Monte Carlo) algorithms. Part III will be based on creating a Bayesian regression model from scratch and interpreting its results in R.

Key Takeaways

  • The comparison between Frequentist and bayesian statistics.
  • Conditional probability and Bayes theorem derivation.
  • Three different Bayesian inference functions.
  • Significant tests for Bayes’ theorem.

Frequently Asked Questions

Q1. What are the differences between Bayesian statistics and Frequentist statistics?

A. Frequentist statistics don’t take the probabilities of the parameter values, while bayesian statistics take into account conditional probability.

Q2. What is Bayesian statistics in simple words?

A. Bayesian statistics is the calculation of outcomes based on the probabilities of the independent variables.

Q3. What is a simple example of Bayesian inference?

A. If a diagnosisis test has precision and recall of 99%, then the probability of having a disease after getting a positive result is not 99%. Because it also depends on the probability of having the disease in the total population. https://www.youtube.com/watch?v=R13BD8qKeTg

NSS 12 May 2023

I am a perpetual, quick learner and keen to explore the realm of Data analytics and science. I am deeply excited about the times we live in and the rate at which data is being generated and being transformed as an asset. I am well versed with a few tools for dealing with data and also in the process of learning some other tools and knowledge required to exploit data.

Frequently Asked Questions

Lorem ipsum dolor sit amet, consectetur adipiscing elit,

Responses From Readers

Clear

alEx
alEx 20 Jun, 2016

Thx for this great explanation. I'm a beginner in statistics and data science and I really appreciate it. If you're interested to see another approach, how toddler's brain use Bayesian statistics in a natural way there is a few easy-to-understand neuroscience courses : http://www.college-de-france.fr/site/en-stanislas-dehaene/_course.htm

Nikhil
Nikhil 20 Jun, 2016

Hey one question `difference` -> 0.5*(No. of tosses) - no. of heads is it correct?

cicek
cicek 20 Jun, 2016

Did you miss the index i of A in the general formula of the Bayes' theorem on the left hand side of the equation (section 3.2)?

Bharath
Bharath 20 Jun, 2016

Nice visual to represent Bayes theorem, thanks

Anja Rebber
Anja Rebber 20 Jun, 2016

I will let you know tomorrow! Because tomorrow I have to do teaching assistance in a class on Bayesian statistics. I will try to explain it your way, then I tell you how it worked out. For me it looks perfect! Thanks!

Melissa L Moser
Melissa L Moser 21 Jun, 2016

Thorough and easy to understand synopsis. Good stuff. Thanks.

Gaurav
Gaurav 21 Jun, 2016

It was a really nice article, with nice flow to compare frequentist vs bayesian approach. I will look forward to next part of the tutorials.

Sachin Hosamani
Sachin Hosamani 21 Jun, 2016

Excellent article. I didn't knew much about Bayesian statistics, however this article helped me improve my understanding of Bayesian statistics.

Fang Xianfu
Fang Xianfu 21 Jun, 2016

Without wanting to suggest that one approach or the other is better, I don't think this article fulfilled its objective of communicating in "simple English". The communication of the ideas was fine enough, but if the focus is to be on "simple English" then I think that the terminology needs to be introduced with more care, and mathematical explanations should be limited and vigorously explained.

Davide Caldara
Davide Caldara 21 Jun, 2016

It's a good article. As a beginner I have a few difficulties with the last part (chapter 5) but the previous parts were really good

Scott
Scott 22 Jun, 2016

Very nice refresher. Thank you and keep them coming.

Sailesh
Sailesh 22 Jun, 2016

Thank you, NSS for this wonderful introduction to Bayesian statistics. The visualizations were just perfect to establish the concepts discussed. Although I lost my way a little towards the end(Bayesian factor), appreciate your effort!

Roel
Roel 22 Jun, 2016

this 'stopping intention' is not a regular thing in frequentist statistics. In fact I only hear about it today. It sort of distracts me from the bayesian thing that is the real topic of this post. Perhaps you never worked with frequentist statistics?

Roel
Roel 22 Jun, 2016

Some small notes, but let me make this clear: I think bayesian statistics makes often much more sense, but I would love it if you at least make the description of the frequentist statistics correct. Also let's not make this a debate about which is better, it's as useless as the python vs r debate, there is none. "In this, the t-score for a particular sample from a sampling distribution of fixed size is calculated. Then, p-values are predicted. We can interpret p values as (taking an example of p-value as 0.02 for a distribution of mean 100) : There is 2% probability that the sample will have mean equal to 100." This is incorrect. a p-value says something about the population. You inference about the population based on a sample. If mean 100 in the sample has p-value 0.02 this means the probability to see this value in the population under the nul-hypothesis is .02. Which makes it more likely that your alternative hypothesis is true. "sampling distributions of different sizes, one is bound to get different t-score and hence different p-value. It is completely absurd." correct it is an estimation, and you correct for the uncertainty in I know it makes no sense, we test for an effect by looking at the probabilty of a score when there is no effect. if that is a small change we say that the alternative is more likely.

José Avila
José Avila 23 Jun, 2016

This is a really good post! Thanks for share this information in a simple way! I have some questions that I would like to ask! 1) I didn't understand very well why the C.I. "do not provide the most probable value for a parameter and the most probable values". Before to read this post I was thinking in this way: the real mean of population is between the range given by the CI with a, for example, 95%) 2) I read a recent paper which states that rejecting the null hypothesis by bayes factor at <1/10 could be equivalent as assuming a p value <0.001 for reject the null hypothesis (actually, I don't remember very well the exact values, but the idea of makeing this equivalence is correct? could be good to apply this equivalence in research?) 3) For making bayesian statistics, is better to use R or Phyton? or it depends on each person? Now I m learning Phyton because I want to apply it to my research (I m biologist!) Thanks in advance and sorry for my not so good english! Jose Avila

Shane
Shane 24 Jun, 2016

Hi NSS, A quick question about section 4.2: If alpha = no. of heads and beta = no. of tail Why the alpha value = the number of trails in the R code: > alpha=c(0,2,10,20,50,500) # it looks like the total number of trails, instead of number of heads.... > beta=c(0,2,8,11,27,232) I plotted the graphs and the second one looks different from yours... Thanks, Shane

Ayush Mehta
Ayush Mehta 26 Jun, 2016

How can I know when the other posts in this series are released?

Boomy
Boomy 26 Jun, 2016

Thank you for this Blog. I like it and I understand about concept Bayesian. I can practice in R and I can see something. I think, you should write the next guide on Bayesian in the next time. I will wait.

Asanka
Asanka 29 Jun, 2016

HI... Good post and keep it up ... very useful...

Nikhil
Nikhil 04 Aug, 2016

printer friendly version please!

Nishtha
Nishtha 25 Mar, 2017

Hi NSS Thanks for the much needed comprehensive article. Please tell me a thing :- "Since HDI is a probability, the 95% HDI gives the 95% most credible values. It is also guaranteed that 95 % values will lie in this interval unlike C.I." How is this unlike CI? As far as I know CI is the exact same thing.

Stev
Stev 19 Jun, 2017

Hi, greetings from Latam. I liked this. You've given us a good and simple explanation about Bayesian Statistics. Help me, I've not found the next parts yet.

Vishal Dhamal
Vishal Dhamal 17 Aug, 2017

Nice examples using Lauda and Hunt, it was relatively easy to understand and appreciate conditional probability. Using a word like belief also made me thinking. I would love to explore Bayesian approach in medical science. Will stay tuned for more and share my ideas as they come.

Cherry
Cherry 21 Aug, 2017

Hello, may I ask, have you finished part II, "Part II of this series will focus on the Dimensionality Reduction techniques using MCMC (Markov Chain Monte Carlo) algorithms", I really hope to understand these better. This article is great for me! If there are part II, III, could you write down the urls? Thank you very much!

Mathias Janssens
Mathias Janssens 06 Sep, 2017

Hello, first of all, very interesting post, thanks for that! I have a little questing about the last formula used in 4.1: shouldn't there be a multiplicator (the factorial calculation) that represents the amount of possibilities how the event (z) can occur, given the number of flips (N)? Thanks!

Ganesh
Ganesh 17 Sep, 2017

Thanks for this excellent article. Can you please share the link to the 2nd and 3rd part of the blog.

Benn
Benn 21 Sep, 2017

Hi, This is probably a silly question, but I am confused about the expression in section 4 - Baysian Inference. You mention that the P(B) = the sum of BnA. (for all events A). However in section 3.1 - conditional probability, the P(AnB) does not equal P(B), the P(B) is the blue + red areas. Have I missed something? BTW, great article so far! just need some clarification. Thanks

Aakash
Aakash 31 Oct, 2017

Please share the link to the part 2 if you have published it.

Oladejo Gbolagade
Oladejo Gbolagade 01 Dec, 2017

Thanks I enjoy it as a beginner for grace to your elbow

Dr. Satish Chinchorkar
Dr. Satish Chinchorkar 05 Aug, 2022

Thanks for making the concepts clear. Really very helpful article.

Qihu Zhang
Qihu Zhang 06 Aug, 2022

Hi NSS, This is a really good paper. I will appreciate it if you can provide the figure and code for section 5.3 and 5.4

nancy
nancy 15 Oct, 2022

This helps a lot thanks for the information

sampath kumar
sampath kumar 15 Oct, 2022

I also think the index i is missing in LHS of the general formula in subsection 3.2 (the last equation in that subsection).

Ehsan
Ehsan 24 Dec, 2022

"P(A|B)=1" seems to be wrong since it rained one time when James won and one time when Niki won.

  • [tta_listen_btn class="listen"]