A Comprehensive Tutorial to Learn Data Science with Julia from Scratch
Recently, I came across a quote about Julia:
“Walks like python. Runs like C.”
The above line tells a lot about why I chose to write this article. I came across Julia a while ago even though it was in its early stages, it was still creating ripples in the numerical computing space. Julia is a work straight out of MIT, a high-level language that has a syntax as friendly as Python and performance as competitive as C. This is not all, It provides a sophisticated compiler, distributed parallel execution, numerical accuracy, and an extensive mathematical function library.
But this article isn’t about praising Julia, it is about how can you utilize it in your workflow as a data scientist without going through hours of confusion which usually comes when we come across a new language. Read more about Why Julia? here.
Table of Contents
- Basics of Julia for Data Analysis
- Running your first program
- Julia Data Structures
- Loops, Conditionals in Julia
- Exploratory analysis with Julia
- Introduction to DataFrames.jl
- Visualisation in Julia using Plots.jl
- Bonus – Interactive visualizations using Plotly
- Data Munging in Julia
- Building a predictive ML model
- Logistic Regression
- Decision Tree
- Random Forest
- Calling R and Python libraries in Julia
- Using pandas with Julia
- Using ggplot2 in Julia
Before we can start our journey into the world of Julia, we need to set up our environment with the necessary tools and libraries for data science.
- Download Julia for your specific system from here
- Follow the platform-specific instructions to install Julia on your system from here
- If you have done everything correctly, you’ll get a Julia prompt from the terminal.
Installing IJulia and Jupyter Notebook
Jupyter notebook has become an environment of choice for data science since it is really useful for both fast experimenting and documenting your steps. There are other environments too for Julia like Juno IDE but I recommend to stick with the notebook. Let’s look at how we can setup the same for Julia.
Go to the Julia prompt and type the following code
Note that Pkg.add() command downloads files and package dependencies in the background and installs it for you. For this, you should have an active internet connection. If your internet is slow, you might have to wait for some time.
After ijulia is successfully installed you can type the following code to run it,
julia> using IJulia julia> notebook()
By default, the notebook “dashboard” opens in your home directory ( homedir() ), but you can open the dashboard in a different directory with notebook(dir=”/some/path”) .
There you have your environment all set up. Let’s install some important Julia libraries that we’d be needing for this tutorial.
Installing Julia Packages
A simple way of installing any package in Julia is using the command Pkg.add(“..”). Like Python or R, Julia too has a long list of packages for data science. I thought instead of installing all the packages together it would be better if we install them as and when needed, that’d give you a good sense of what each package does. So we will be following that process for this article.
Basics of Julia for Data Analysis
Julia is a language that derives a lot of syntax from other data analysis tools like R, Python, and MATLAB. If you are from one of these backgrounds, it would take you no time to get started with it. Let’s learn some of the basic syntaxes. If you are in a hurry here’s a cheat sheet comparing syntax of all the three languages:
Running your first Julia program
- Open your Jupyter notebook from Julia prompt using the following command
julia> using IJulia julia> notebook()
- Click on New and select Julia notebook from the dropdown
There, you created your first Julia notebook! Just like you use jupyter notebook for R or Python, you can write Julia code here, train your models, make plots and so much more all while being in the familiar environment of jupyter.
Few things to note
- You can name a notebook by simply clicking on the name – Untitled in the top left area of the notebook. The interface shows In [*] for inputs and Out[*] for output.
- You can execute a code by pressing “Shift + Enter” or “ALT + Enter”, if you want to insert an additional row after.
Go ahead and play around a bit with the notebook to get familiar.
Julia Data Structures
The following are some of the most common data structures we end up using when performing data analysis on Julia:
- Vector(Array) – A vector is a 1-Dimensional array. A vector can be created by simply writing numbers separated by a comma in square brackets. If you add a semicolon, it will change the row. Vectors are widely used in linear algebra.
Note that in Julia the indexing starts from 1, so if you want to access the first element of an array you’ll do A.
- Matrix – Another data structure that is widely used in linear algebra, it can be thought of as a multidimensional array. Here are some basic operations that can be performed in a matrix
- Dictionary – D ictionary is an unordered set of key: value pairs, with the requirement that the keys are unique (within one dictionary). You can create a dictionary using the Dict() function.
Notice that “=>” operator is used to link key with their respective values. You access the values of the dictionary using its key.
- String – Strings can simply be defined by use of double ( ” ) or triple ( ”’ ) inverted commas. Like Python, strings in Julia are also immutable(they can’t be changed once created). Look at the error below.
Loops, Conditionals in Julia
Like most languages, Julia also has a FOR-loop which is the most widely used method for iteration. It has a simple syntax:
for i in [Julia Iterable] expression(i) end
Here “Julia Iterable” can be a vector, string or other advanced data structures which we will explore in later sections. Let’s take a look at a simple example, determining the factorial of a number ‘n’.
fact=1 for i in range(1,5) fact = fact*i end print(fact)
Julia also supports the while loop and various conditionals like if, if/else, for selecting a bunch of statements over another based on the outcome of the condition. Here is an example,
if N>=0 print("N is positive") else print("N is negative") end
The above code snippet performs a check on N and prints whether it is a positive or a negative number. Note that julia is not indentation sensitive like Python but it is a good practice to indent your code that’s why you’ll find code samples in this article well indented. Here is a list of Julia conditional constructs compared to their counterparts in MATLAB and Python.
You can learn more about Julia basics here .
Now that we are familiar with Julia fundamentals, let’s take a deep dive into problem-solving. Yes, I mean making a predictive model! In the process, we use some powerful libraries and also come across the next level of data structures. We will take you through the 3 key phases:
- Data Exploration – finding out more about the data we have
- Data Munging – cleaning the data and playing with it to make it better suit statistical modeling
- Predictive Modeling – running the actual algorithms and having fun 🙂
Exploratory Analysis using Julia (Analytics Vidhya Hackathon)
The first step in any kind of data analysis is exploring the dataset at hand. There are two ways to do that, the first is exploring the data tables and applying statistical methods to find patterns in numbers and the second is plotting the data to find patterns visually.
The former requires an advanced data structure that is capable of handling multiple operations and at the same time is fast and scalable. Like many other data analysis tools, Julia provides one such structure called DataFrame. You need to install the following package for using it:
Introduction to DataFrames.jl
A dataframe is similar to Excel workbook – you have column names referring to columns and you have rows, which can be accessed with the use of row numbers. The essential difference is that column names and row numbers are known as column and row index, in case of dataframes . This is similar to pandas.DataFrame in Python or data.table in R.
Let’s work with a real problem. We are going to analyze an Analytics Vidhya Hackathon as a practice dataset.
Practice dataset: Loan Prediction Problem
You can download the dataset from here . Here is the description of variables:
Importing libraries and the data set
In Julia we import a library by the following command:
Let’s first import our DataFrames.jl library and load the train.csv file of the data set:
using DataFrames train = readtable(“train.csv”)
Quick Data Exploration
Once the data set is loaded, we do preliminary exploration on it. Such as finding the size(number of rows and columns) of the data set, the name of columns etc. The function size(train) is used to get the number of rows and columns of the data set and names(train) is used to get the names of columns(features).
The data set is not that large(only 614 rows) knowing the size of data set sometimes affect the choice of our algorithm. There are 13 columns(features) we have that is also not much, in case of a large number of features we go for techniques like dimensionality reduction etc. Let’s look at the first 10 rows to get a better feel of how our data looks like? The head(,n) function is used to read the first n rows of a dataset.
A number of preliminary inferences can be drawn from the above table such as:
- Gender, Married, Education, Self_Employed, Credit_History, Property_Area are all categorical variables with two categories each.
- Loan_ID is just a unique number, it doesn’t provide any information to help in regard to the loan getting accepted or not.
- Some columns have missing values like LoanAmount.
Note that these inferences are just preliminary they will either get rejected or updated after further exploration.
I am interested in analyzing the LoanAmount column, let’s have a closer look at that.
describe() function would provide the count(length), mean, median, minimum, quartiles and maximum in its output (Read this article to refresh basic statistics to understand population distribution).
Please note that we can get an idea of a possible skew in the data by comparing the mean to the median, i.e. the 50% figure.
For the non-numerical values (e.g. Property_Area, Credit_History etc.), we can look at frequency distribution to understand whether they make sense or not. The frequency table can be printed by the following command:
countmap ( train[:Property_Area])
Similarly, we can look at unique values of credit history. Note that dataframe_name[:column_name] is a basic indexing technique to access a particular column of the dataframe. A column can also be accessed by its index. For more information, refer to the documentation .
Visualisation in Julia using Plots.jl
Another effective way of exploring the data is by doing it visually using various kind of plots as it is rightly said, “A picture is worth a thousand words” .
Julia doesn’t provide a plotting library of its own but it lets you use any plotting library of your own choice in Julia programs. In order to use this functionality you need to install the following package:
julia> Pkg.add(“Plots.jl”) julia>Pkg.add(“StatPlots.jl”) julia>Pkg.add(“PyPlot.jl”)
The package “Plots.jl” provides a single frontend(interface) for any plotting library(matplotlib, plotly, etc.) you want to use in Julia. “StatPlots.jl” is a supporting package used for Plots.jl. “PyPlot.jl” is used to work with matplotlib of Python in Julia.
Now that we are familiar with basic data characteristics, let us study the distribution of various variables. Let us start with numeric variables – namely ApplicantIncome and LoanAmount
Let’s start by plotting the histogram of ApplicantIncome using the following commands:
using Plots, StatPlots #import required packages pyplot() #Set the backend as matplotlib.pyplot Plots.histogram(dropna(train[:ApplicantIncome]),bins=50,xlabel="ApplicantIncome",labels="Frequency") #Plot histogram
Here we observe that there are few extreme values. This is also the reason why 50 bins are required to depict the distribution clearly.
Next, we look at box plots to understand the distributions. Box plot for fare can be plotted by:
This confirms the presence of a lot of outliers/extreme values. This can be attributed to the income disparity in the society. Part of this can be driven by the fact that we are looking at people with different education levels. Let us segregate them by Education:
We can see that there is no substantial difference between the mean income of graduate and non-graduates. But there are a higher number of graduates with very high incomes, which are appearing to be the outliers.
Now, Let’s look at the histogram and boxplot of LoanAmount using the following command:
Again, there are some extreme values. Clearly, both ApplicantIncome and LoanAmount require some amount of data munging. LoanAmount has missing and well as extreme values, while ApplicantIncome has a few extreme values, which demand deeper understanding. We will take this up in coming sections.
That was a lot of useful visualizations, to learn more about creating visualizations in Julia using Plots.jl Plots.jl Documentation
Bonus: Interactive visualizations using Plotly
Now’s the time where awesomeness of Plots.jl comes into play. The visualizations we created till now were all good but while exploration it is useful if the plot is interactive. We can create interactive plots in Julia using Plotly as a backend. Type the following code
plotly() #use plotly as backend Plots.histogram(dropna(train[:ApplicantIncome]),bins=50,xlabel="ApplicantIncome",labels="Frequency")
You can do much more with Plots.jl and various backends it supports. Read Plots.jl Documentation 🙂
Data Munging in Julia
For those, who have been following, here you must wear your shoes to start running.
Data munging – recap of the need
While our exploration of the data, we found a few problems in the data set, which needs to be solved before the data is ready for a good model. This exercise is typically referred as “Data Munging”. Here are the problems, we are already aware of:
- There are missing values for some variables. We should estimate those values wisely depending on a number of missing values and the expected importance of variables.
- While looking at the distributions, we saw that ApplicantIncome and LoanAmount seemed to contain extreme values at either end. Though they might make intuitive sense, but should be treated appropriately.
In addition to these problems with numerical fields, we should also look at the non-numerical fields i.e. Gender, Property_Area, Married, Education and Dependents to see, if they contain any useful information.
Check missing values in the dataset
Let us look at missing values in all the variables because most of the models don’t work with missing data and even if they do, imputing them helps more often than not. So, let us check the number of nulls / NaNs in the dataset
Though the missing values are not very high in number, many variables have them and each one of these should be estimated and added to the data.
Note: Remember that missing values may not always be NaNs. For instance, if the Loan_Amount_Term is 0, does it makes sense or would you consider that missing? I suppose your answer is missing and you’re right. So we should check for values which are unpractical.
How to fill missing values?
There are multiple ways of fixing missing values in a dataset. Take LoanAmount for example, there are numerous ways to fill the missing values – the simplest being replacement by the mean.
The other extreme would be to build a supervised learning model to predict loan amount on the basis of other variables and then use age along with other variables to predict survival.
We would be taking the simpler approach to fix missing values in this article:
#replace missing loan amount with mean of loan amount train[isna.(train[:LoanAmount]),:LoanAmount] = floor(mean(dropna(train[:LoanAmount]))) #replace 0.0 of loan amount with the mean of loan amount train[train[:LoanAmount] .== 0, :LoanAmount] = floor(mean(dropna(train[:LoanAmount]))) #replace missing gender with mode of gender values train[isna.(train[:Gender]), :Gender] = mode(dropna(train[:Gender])) #replace missing married with mode value train[isna.(train[:Married]), :Married] = mode(dropna(train[:Married])) #replace missing number of dependents with the mode value train[isna.(train[:Dependents]),:Dependents]=mode(dropna(train[:Dependents])) #replace missing values of the self_employed column with mode train[isna.(train[:Self_Employed]),:Self_Employed]=mode(dropna(train[:Self_Employed])) #replace missing values of loan amount term with mode value train[isna.(train[:Loan_Amount_Term]),:Loan_Amount_Term]=mode(dropna(train[:Loan_Amount_Term])) #replace credit history missing values with mode train[isna.(train[:Credit_History]), :Credit_History] = mode(dropna(train[:Credit_History]))
I have basically replaced all missing values in numerical columns with their means and with the mode in categorical columns. Let’s understand the code little closely,
train[isna.(train[:LoanAmount]),:LoanAmount] = floor(mean(dropna(train[:LoanAmount])))
- train[:LoanAmount] – access LoanAmount column from dataframe.
- isna.(..) – returns true or false based on whether there is missing value in the column.
- train[condition, :column_name] – returns the rows of the given column that satisfy the condition(In this case if the values is NA).
- dropna(..) – ignore NA values.
- mean(..) – mean of column values.
- floor(..) – perform floor operation on the value.
I hope this gives you a better understanding of the code part that is used to fix missing values.
As discussed earlier, there are better ways to perform data imputation and I encourage you to learn as many as you can. Get a detailed view of different imputation techniques through this article .
Building a predictive ML model
Now that we have fixed all missing values, we will be building a predictive machine learning model. We will also be cross-validating it and saving it to the disk for future use. The following packages are required for doing so:
This package is an interface to Python’s scikit-learn package so python users are in for a treat. The interesting thing about using this package is you get to use the same models and functionality as you used in Python.
Label Encoding categorical data
Sklearn requires all data to be of numeric type so let’s label encode our data,
using ScikitLearn @sk_import preprocessing: LabelEncoder labelencoder = LabelEncoder() categories = [2 3 4 5 6 12 13] for col in categories train[col] = fit_transform!(labelencoder, train[col]) end
Those who have used sklearn before will find this code to be familiar, we are using LabelEncoder to encode the categories. I have used the index of columns with categorical data.
Next, we will import the required modules. Then we will define a generic classification function, which takes a model as input and determines the Accuracy and Cross-Validation scores. Since this is an introductory article and julia code is very similar to python, I will not go into the details of coding. Please refer to this article for getting details of the algorithms with R and Python codes. Also, it’ll be good to get a refresher on cross-validation through this article , as it is a very important measure of power performance.
using ScikitLearn: fit!, predict, @sk_import, fit_transform! @sk_import preprocessing: LabelEncoder @sk_import model_selection: cross_val_score @sk_import metrics: accuracy_score @sk_import linear_model: LogisticRegression @sk_import ensemble: RandomForestClassifier @sk_import tree: DecisionTreeClassifier function classification_model(model, predictors) y = convert(Array, train[:13]) X = convert(Array, train[predictors]) X2 = convert(Array, test[predictors]) #Fit the model: fit!(model, X, y) #Make predictions on training set: predictions = predict(model, X) #Print accuracy accuracy = accuracy_score(predictions, y) println("\naccuracy: ",accuracy) #5 fold cross validation cross_score = cross_val_score(model, X, y, cv=5) #print cross_val_score println("cross_validation_score: ", mean(cross_score)) #return predictions fit!(model, X, y) pred = predict(model, X2) return pred end
Let’s make our first Logistic Regression model. One way would be to take all the variables into the model but this might result in overfitting (don’t worry if you’re unaware of this terminology yet). In simple words, taking all variables might result in the model understanding complex relations specific to the data and will not generalize well. Read more about Logistic Regression .
We can easily make some intuitive hypothesis to set the ball rolling. The chances of getting a loan will be higher for:
- Applicants having a credit history (remember we observed this in exploration?)
- Applicants with higher applicant and co-applicant incomes
- Applicants with higher education level
- Properties in urban areas with high growth perspectives
So let’s make our first model with ‘Credit_History’.
model = LogisticRegression() predictor_var = [:Credit_History] classification_model(model, predictor_var)
Accuracy : 80.945% Cross-Validation Score : 80.957%
#We can try a different combination of variables: predictor_var = [:Credit_History, :Education, :Married, :Self_Employed, :Property_Area] classification_model(model, predictor_var)
Accuracy : 80.945% Cross-Validation Score : 80.957%
Generally, we expect the accuracy to increase by adding variables. But this is a more challenging case. The accuracy and cross-validation score are not getting impacted by less important variables. Credit_History is dominating the mode. We have two options now:
- Feature Engineering derives new information and tries to predict those. I will leave this to your creativity.
- Better modeling techniques. Let’s explore this next.
A decision tree is another method for making a predictive model. It is known to provide higher accuracy than logistic regression model. Read more about Decision Trees.
model = DecisionTreeClassifier() predictor_var = [:Credit_History, :Gender, :Married, :Education] classification_model(model, predictor_var)
Accuracy : 80.945% Cross-Validation Score : 76.656%
Here the model based on categorical variables is unable to have an impact because Credit History is dominating over them. Let’s try a few numerical variables:
#We can try different combinations of variables: predictor_var = [:Credit_History, :Loan_Amount_Term] classification_model(model, predictor_var)
Accuracy : 99.345% Cross-Validation Score : 72.009%
Here we observed that although the accuracy went up on adding variables, the cross-validation error went down. This is the result of model over-fitting the data. Let’s try an even more sophisticated algorithm and see if it helps:
Random forest is another algorithm for solving the classification problem. Read more about Random Forest.
An advantage with Random Forest is that we can make it work with all the features and it returns a feature importance matrix which can be used to select features.
model = RandomForestClassifier(n_estimators=100) predictors =[:Gender, :Married, :Dependents, :Education, :Self_Employed, :Loan_Amount_Term, :Credit_History, :Property_Area, :LoanAmount] classification_model(model, predictors)
Accuracy : 100.000% Cross-Validation Score : 78.179%
Here we see that the accuracy is 100% for the training set. This is the ultimate case of overfitting and can be resolved in two ways:
- Reducing the number of predictors
- Tuning the model parameters
The updated code would now be
model = RandomForestClassifier(n_estimators=100, min_samples_split=25, max_depth=8, n_jobs=-1) predictors = [:ApplicantIncome, :CoapplicantIncome, :LoanAmount, :Credit_History, :Loan_Amoun_Term, :Gender, :Dependents] classification_model(model, predictors)
Accuracy : 82.410% Cross-Validation Score : 80.635%
Notice that although accuracy reduced, the cross-validation score is improving showing that the model is generalizing well. Remember that random forest models are not exactly repeatable. Different runs will result in slight variations because of randomization. But the output should stay in the ballpark.
You would have noticed that even after some basic parameter tuning on the random forest, we have reached a cross-validation accuracy only slightly better than the original logistic regression model. This exercise gives us some very interesting and unique learning:
- Using a more sophisticated model does not guarantee better results.
- Avoid using complex modeling techniques as a black box without understanding the underlying concepts. Doing so would increase the tendency of overfitting thus making your models less interpretable
- Feature Engineering is the key to success. Everyone can use Xgboost models but the real art and creativity lie in enhancing your features to better suit the model.
So are you ready to take on the challenge? Start your data science journey with Loan Prediction Problem.
Calling R and Python libraries in Julia
Julia is a powerful language with interesting libraries but it may so happen that you want to use library of your own from outside Julia. One such reason can be lack of functionality in existing Julia libraries(it is still very young). For situations like this, Julia provides ways to call libraries from R and Python. Let’s see how can we do that?
Using pandas with Julia
Install the following package:
using PyCall @pyimport pandas as pd df = pd.read_csv("train.csv")
There is something interesting about using a Python library as smoothly in another language.
Pandas is a very mature and performant library, it is certainly a bliss that we can use it wherever the native DataFrames.jl falls short.
Using ggplot2 in Julia
Install the following packages:
julia> Pkg.add("RDatsets.jl") julia> Pkg.add("RCall.jl")
using RCall, RDatasets mtcars = datasets("datasets", "mtcars"); library(ggplot2) ggplot($mtcars, aes(x = WT, y=MPG)) + geom_point()
I hope this tutorial will help you maximize your efficiency when starting with data science in Julia. I am sure this not only gave you an idea about basic data analysis methods but it also showed you how to implement some of the more sophisticated techniques available today.
Julia is really a great tool and is becoming an increasingly popular language among the data scientists. The reason being, it’s easy to learn, integrates well with other tools, gives C like speed and also allows using libraries of existing tools like R and Python.
So, learn Julia to perform the full life-cycle of any data science project. It includes reading, analyzing, visualizing and finally making predictions.
If you come across any difficulty while practicing Julia, or you have any thoughts/suggestions/feedback on the post, please feel free to post them in comments below.