# Unleashing the Power of Autoencoders: Applications and Use Cases

## Introduction

Extracting important insights from complicated datasets is the key to success in the era of data-driven decision-making. Enter autoencoders, deep learning‘s hidden heroes. These interesting neural networks can compress, reconstruct, and extract important information from data. Autoencoders have transformed the field of machine learning by revealing hidden patterns, lowering dimensionality, identifying abnormalities, and even producing new content. Join us as we explore the realm of autoencoders using encoders and decoders, debunk their inner workings, investigate their diverse applications, and experience the revolutionary impact they may have on your data analysis endeavors.

Learn More: *A Gentle Introduction to Autoencoders for Data Science Enthusiasts*

This article was published as a part of the Data Science Blogathon.

## Table of contents

- Introduction
- Layman Explanation of Autoencoders
- Architecture of Autoencoder
- Applications of Autoencoder
- Advantage of Autoencoder
- Disadvantages of Autoencoders
- Implementation of Autoencoders
- Implementation of Autoencoder – Feature Extraction
- Implementation of Autoencoders – Dimensionality Reduction
- Implementation of Autoencoders – Classification
- Implementation of Autoencoders – Anomaly Detection
- Conclusion

## Layman Explanation of Autoencoders

Consider a photographer taking a high-resolution photo of a location and then making a lower-resolution thumbnail of that photo to comprehend this better. The thumbnail may not have as much detail as the original shot, but it still provides an excellent depiction of the situation. Similarly, an autoencoder compresses a high-dimensional dataset into a lower-dimensional representation that can be utilized for anomaly identification or data visualization.

Image compression is one application where autoencoders might be helpful. By training an autoencoder on a large dataset of images, the model can learn to identify the essential elements of the image and compress it into a smaller representation while retaining high image quality. This can be handy when storage space or network bandwidth is limited.

So now, Autoencoders is an artificial neural network that learns unsupervised. They are typically used for dimensionality reduction, feature learning, and data compression. Autoencoders are neural networks that learn a compressed dataset representation and then use it to retrieve the original data with little information loss.

An encoder translates the input data to a lower-dimensional representation, while a decoder converts the lower-dimensional representation back to the original input space. The encoder and decoder are trained concurrently to minimize reconstruction error using a loss function such as mean squared error.

Autoencoders are helpful when working with high-dimensional data such as images, music, or text. They can minimize the dimensionality of the data while keeping its vital qualities by learning a compressed version of it. Anomaly detection is another prominent application for autoencoders. Because autoencoders can learn to reconstruct standard data with minimal loss, any data point with a high reconstruction error can be classified as an anomaly.

## Architecture of Autoencoder

An autoencoder’s architecture comprises two components: the encoder and the decoder. The encoder

turns the input data into a lower-dimensional representation, which the decoder uses to reconstruct the original input data as precisely as possible. Training the encoder and decoder simultaneously unsupervised, meaning the network does not need labeled data to learn the mapping between input and

output. Here’s a step-by-step breakdown of the autoencoder architecture:

**Latent Space:** The latent space is the encoder’s learn lower-dimensional input data representation. It is frequently significantly smaller than the input data and captures the data’s most important properties.

**Decoder:** The compressed representation (latent space) is fed into the decoder, reconstructing the

original input data. The decoder, like the encoder, comprises numerous layers of neural networks. The decoder’s last layer outputs rebuilt data, which should be as near to the original input data as feasible.

**Loss Function:** To evaluate the reconstruction’s quality, we can use a loss function, such as MSE or binary cross-entropy. The loss function computes and trains the network to minimize the

difference between the input and reconstructed data. Using backpropagation during training to update the encoder and decoder, which adjusts the network’s weights and biases to minimize the loss function.

**Training:** We can simultaneously train the encoder and decoder to teach the complete network end-to-end. The training aims to learn a compressed representation of the input data that

captures the essential features while minimizing reconstruction error.

## Applications of Autoencoder

**Image and Audio Compression: **Autoencoders can compress huge images or audio files while

maintaining most of the vital information. An autoencoder is trained to recover the original picture or audio file from a compressed representation.

**Anomaly Detection:** One can detect anomalies or outliers in datasets using autoencoders. Training the autoencoder on a dataset of normal data and any input that the autoencoder cannot accurately reconstruct is called an anomaly.

**Dimensionality Reduction: **Autoencoders can lower the dimensionality of high-dimensional datasets. We can accomplish this by teaching an autoencoder a lower-dimensional data representation that captures the most relevant features.

**Data Generation:** Employ autoencoders to generate new data similar to the training data. One can accomplish this by sampling from the autoencoder’s compressed representation and then utilizing the decoder to create new data.

**Denoising:** One can utilize autoencoders to reduce noise from data. We can accomplish this by teaching

an autoencoder to recover the original data from a noisy version.

**Recommender System: Using autoencoders, we can us**e users’ preferences to generate personalized suggestions. We can accomplish this by training an autoencoder to learn a compressed representation of the user’s history of system interactions and then utilizing this representation to forecast the user’s preferences for new items.

## Advantage of Autoencoder

- Firstly, autoencoders can learn to represent input data in compressed form. By compressing the data into a lower-dimensional latent space, they can successfully capture the most conspicuous characteristics of the input. These acquired qualities may be useful for subsequent classification, grouping, or anomaly detection tasks.
- Because we may train the autoencoders on unlabeled data, they are well suited for unsupervised learning circumstances where labeled data is rare or unavailable. Autoencoders can find underlying patterns or structures in data by learning to recreate the input data without explicit labeling.
- We can use autoencoders for data compression by encoding the input data into a lower-dimensional form. This is beneficial for storage and transmission since it reduces the required storage space or network bandwidth while allowing accurate reconstruction of the original data.
- Moreover, autoencoders can identify data anomalies or outliers. An autoencoder learns to consistently reconstruct normal data instances by training it on normal data patterns. Anomalies or outliers that deviate greatly from the learned patterns will have increased reconstruction errors, making them detectable.
- VAEs (variational autoencoders) are a type of autoencoder that can be used for generative modeling. VAEs can generate new data samples by sampling from a previously learned latent space distribution. This is useful for tasks such as image or text generation.

## Disadvantages of Autoencoders

- Firstly, we can learn simple solutions via autoencoders, in which the model fails to capture relevant properties and instead memorizes or replicates the input data. As a result, generality is constrained, and real-world applications are restricted.
- Autoencoders may fail to capture complex data linkages when working with high-dimensional or structured data. They may be incapable of accurately capturing complex relationships, resulting in inadequate reconstruction or feature extraction.
- Furthermore, autoencoder training can be computationally time-consuming, especially for deep or intricate structures. Working with large datasets or with limited processing resources may make this difficult.
- Lastly, autoencoders frequently require substantial training data to learn meaningful representations. Inadequate data can lead to overfitting, which occurs when the model fails to generalize well to new data.

## Implementation of Autoencoders

**1**. Importing Libraries

```
import tensorflow as tf
from tensorflow import keras
from tensorflow.keras import layers
import numpy as np
import matplotlib.pyplot as plt
```

**2.** Importing Datasets

`(x_train, _), (x_test, _) = keras.datasets.mnist.load_data()`

**3.** Normalization

```
x_train = x_train.astype("float32") / 255.0
x_test = x_test.astype("float32") / 255.0
```

4. Reshaping the Data

```
x_train = np.reshape(x_train, (len(x_train), 28, 28, 1))
x_test = np.reshape(x_test, (len(x_test), 28, 28, 1))
```

**5**. Encoding Architecture

```
encoder_inputs = keras.Input(shape=(28, 28, 1))
x = layers.Conv2D(16, 3, activation="relu", padding="same")(encoder_inputs)
x = layers.MaxPooling2D(2, padding="same")(x)
x = layers.Conv2D(8, 3, activation="relu", padding="same")(x)
x = layers.MaxPooling2D(2, padding="same")(x)
x = layers.Conv2D(8, 3, activation="relu", padding="same")(x)
encoder_outputs = layers.MaxPooling2D(2, padding="same")(x)
encoder = keras.Model(encoder_inputs, encoder_outputs, name="encoder")
encoder.summary()
```

**6**. Decoding Architecture

```
decoder_inputs = keras.Input(shape=(4, 4, 8))
x = layers.Conv2D(8, 3, activation="relu", padding="same")(decoder_inputs)
x = layers.UpSampling2D(2)(x)
x = layers.Conv2D(8, 3, activation="relu", padding="same")(x)
x = layers.UpSampling2D(2)(x)
x = layers.Conv2D(16, 3, activation="relu")(x)
x = layers.UpSampling2D(2)(x)
decoder_outputs = layers.Conv2D(1, 3, activation="sigmoid", padding="same")(x)
decoder = keras.Model(decoder_inputs, decoder_outputs, name="decoder")
decoder.summary()
```

**7**. Defining Autoencoder as a Sequential Model

```
autoencoder = keras.Sequential([encoder, decoder])
autoencoder.compile(optimizer="adam", loss="binary_crossentropy")
```

**8.** Training

```
autoencoder.fit(x_train, x_train, epochs=10, batch_size=128, validation_data=
(x_test, x_test))
```

**9**. Encoding and Decoding the Test Images

```
encoded_imgs = encoder.predict(x_test)
decoded_imgs = autoencoder.predict(x_test)
```

```
n = 10 # Number of images to display
plt.figure(figsize=(20, 4))
for i in range(n):
# Display original image
ax = plt.subplot(2, n, i + 1)
plt.imshow(x_test[i].reshape(28, 28))
plt.gray()
ax.get_xaxis().set_visible(False)
ax.get_yaxis().set_visible(False)
# Display reconstructed image
ax = plt.subplot(2, n, i + 1 + n)
plt.imshow(decoded_imgs[i].reshape(28, 28))
plt.gray()
ax.get_xaxis().set_visible(False)
ax.get_yaxis().set_visible(False)
plt.show()
```

## Implementation of Autoencoder – Feature Extraction

Autoencoders will perform different functions, and one of the important functions is feature extraction, here will see how we can use autoencoders for extracting features,

1. Importing Libraries

```
import numpy as np
import matplotlib.pyplot as plt
from keras.datasets import mnist
from keras.models import Model
from keras.layers import Input, Dense
```

2. Loading Dataset

`(x_train, _), (x_test, _) = mnist.load_data()`

3. Normalization

```
x_train = x_train.astype('float32') / 255.
x_test = x_test.astype('float32') / 255.
x_train = x_train.reshape((len(x_train), np.prod(x_train.shape[1:])))
x_test = x_test.reshape((len(x_test), np.prod(x_test.shape[1:])))
```

4. Autoencoder Architecture

```
#import input imag
input_img = Input(shape=(784,))
encoded = Dense(64, activation='relu')(input_img)
decoded = Dense(784, activation='sigmoid')(encoded)
```

5. Model

```
autoencoder = Model(input_img, decoded)
# Compile the model
autoencoder.compile(optimizer='adam', loss='binary_crossentropy')
```

6. Training

```
autoencoder.fit(x_train, x_train, epochs=50, batch_size=256, shuffle=True,
validation_data=(x_test, x_test))
```

7. Extracting Encoded Feature

```
encoder = Model(input_img, encoded)
encoded_imgs = encoder.predict(x_test)
```

8. Plotting Features

```
n = 10 # Number of images to display
plt.figure(figsize=(20, 4))
for i in range(n):
# Display the original image
ax = plt.subplot(2, n, i + 1)
plt.imshow(x_test[i].reshape(28, 28))
plt.gray()
ax.get_xaxis().set_visible(False)
ax.get_yaxis().set_visible(False)
# Display the encoded feature vector
ax = plt.subplot(2, n, i + n + 1)
plt.imshow(encoded_imgs[i].reshape(8, 8))
plt.gray()
ax.get_xaxis().set_visible(False)
ax.get_yaxis().set_visible(False)
plt.show()
```

## Implementation of Autoencoders – Dimensionality Reduction

1. Importing Libraries

```
import numpy as np
import matplotlib.pyplot as plt
from tensorflow import keras
from tensorflow.keras.datasets import mnist
```

2. Importing the Dataset

`(x_train, y_train), (x_test, y_test) = mnist.load_data()`

3. Normalization

```
x_train = x_train.astype('float32') / 255.
x_test = x_test.astype('float32') / 255.
```

4. Flattening

```
x_train_flat = x_train.reshape((len(x_train), np.prod(x_train.shape[1:])))
x_test_flat = x_test.reshape((len(x_test), np.prod(x_test.shape[1:])))
```

5. Autoencoder Architecture

```
#import c
input_dim = 784
encoding_dim = 32
input_layer = keras.Input(shape=(input_dim,))
encoder = keras.layers.Dense(encoding_dim, activation='relu')(input_layer)
decoder = keras.layers.Dense(input_dim, activation='sigmoid')(encoder)
autoencoder = keras.models.Model(inputs=input_layer, outputs=decoder)
# Compile autoencoder
autoencoder.compile(optimizer='adam', loss='binary_crossentropy')
```

6. Training

```
history = autoencoder.fit(x_train_flat, x_train_flat,
epochs=50,
batch_size=256,
shuffle=True,
validation_data=(x_test_flat, x_test_flat))
```

7. Use an encoder to encode input data into a lower-dimensional representation

```
encoder_model = keras.models.Model(inputs=input_layer, outputs=encoder)
encoded_data = encoder_model.predict(x_test_flat)
```

8. Plot encoded data in 2D using the first two principal components

```
from sklearn.decomposition import PCA
pca = PCA(n_components=2)
encoded_pca = pca.fit_transform(encoded_data)
plt.scatter(encoded_pca[:, 0], encoded_pca[:, 1], c=y_test)
plt.colorbar()
plt.show()
```

## Implementation of Autoencoders – Classification

We all know that we go for any model architecture for classification or regression. Still, we do classification predominately. Here will see how we can use autoencoders.

1. Importing Libraries

```
from keras.layers import Input, Dense
from keras.models import Model
```

2. Importing the Dataset

```
from keras.datasets import mnist
(x_train, y_train), (x_test, y_test) = mnist.load_data()
```

3. Normalization

```
x_train = x_train.astype('float32') / 255.
x_test = x_test.astype('float32') / 255.
```

4. Flattening

```
input_dim = 784
x_train = x_train.reshape(-1, input_dim)
x_test = x_test.reshape(-1, input_dim)
```

5. Autoencoder Architecture

```
encoding_dim = 32
input_img = Input(shape=(input_dim,))
encoded = Dense(encoding_dim, activation='relu')(input_img)
decoded = Dense(input_dim, activation='sigmoid')(encoded)
autoencoder = Model(input_img, decoded)
# Compile autoencoder
autoencoder.compile(optimizer='adam', loss='binary_crossentropy')
```

6. Training

```
autoencoder.fit(x_train, x_train,
epochs=50,
batch_size=256,
shuffle=True,
validation_data=(x_test, x_test))
```

7. Extract Compressed Representations of MNIST Images

```
encoder = Model(input_img, encoded)
x_train_encoded = encoder.predict(x_train)
x_test_encoded = encoder.predict(x_test)
```

8. Feedforward Classifier

```
clf_input_dim = encoding_dim
clf_output_dim = 10
clf_input = Input(shape=(clf_input_dim,))
clf_output = Dense(clf_output_dim, activation='softmax')(clf_input)
classifier = Model(clf_input, clf_output)
# Compile classifier
classifier.compile(optimizer='adam', loss='categorical_crossentropy', metrics=['accuracy'])
```

9. Train the Classifier

```
from keras.utils import to_categorical
y_train_categorical = to_categorical(y_train, num_classes=clf_output_dim)
y_test_categorical = to_categorical(y_test, num_classes=clf_output_dim)
classifier.fit(x_train_encoded, y_train_categorical,
epochs=50,
batch_size=256,
shuffle=True,
validation_data=(x_test_encoded, y_test_categorical))
```

## Implementation of Autoencoders – Anomaly Detection

Anomaly detection is a technique for identifying patterns or events in data that are unusual or abnormal compared to most of the data.

Learn More: *Complete Guide to Anomaly Detection with AutoEncoders using Tensorflow*

1. Importing Libraries

```
import numpy as np
import matplotlib.pyplot as plt
from tensorflow import keras
```

2. Importing the Dataset

`(x_train, y_train), (x_test, y_test) = keras.datasets.mnist.load_data()`

3. Normalization

```
x_train = x_train / 255.0
x_test = x_test / 255.0
```

4. Flatten

```
x_train = x_train.reshape((len(x_train), np.prod(x_train.shape[1:])))
x_test = x_test.reshape((len(x_test), np.prod(x_test.shape[1:])))
```

5. Defining Architecture

```
input_dim = x_train.shape[1]
encoding_dim = 32
input_layer = keras.layers.Input(shape=(input_dim,))
encoder = keras.layers.Dense(encoding_dim, activation='relu')(input_layer)
decoder = keras.layers.Dense(input_dim, activation='sigmoid')(encoder)
autoencoder = keras.models.Model(inputs=input_layer, outputs=decoder)
# Compile the autoencoder
autoencoder.compile(optimizer='adam', loss='binary_crossentropy')
```

6. Training

```
autoencoder.fit(x_train, x_train, epochs=50, batch_size=256, shuffle=True,
validation_data=(x_test, x_test))
# Use the trained autoencoder to reconstruct new data points
decoded_imgs = autoencoder. predict(x_test)
```

7. Calculate the Mean Squared Error (MSE) Between the Original and Reconstructed Data Points

`mse = np.mean(np.power(x_test - decoded_imgs, 2), axis=1)`

8. Plot the Reconstruction Error Distribution

```
plt.hist(mse, bins=50)
plt.xlabel('Reconstruction Error')
plt.ylabel('Frequency')
plt.show()
# Set a threshold for anomaly detection
threshold = np.max(mse)
# Find the indices of the anomalous data points
anomalies = np.where(mse > threshold)[0]
# Plot the anomalous data points
n = min(len(anomalies), 10)
plt.figure(figsize=(20, 4))
for i in range(n):
ax = plt.subplot(2, n, i + 1)
plt.imshow(x_test[anomalies[i]].reshape(28, 28))
plt.gray()
ax.get_xaxis().set_visible(False)
ax.get_yaxis().set_visible(False)
ax = plt.subplot(2, n, i + 1 + n)
plt.imshow(decoded_imgs[anomalies[i]].reshape(28, 28))
plt.gray()
ax.get_xaxis().set_visible(False)
ax.get_yaxis().set_visible(False)
plt.show()
```

## Conclusion

In conclusion, autoencoders are compelling neural networks that may be used for data compression, anomaly detection, and feature extraction tasks. Furthermore, one can use autoencoders for various tasks, including computer vision, speech recognition, and natural language processing. We can train the autoencoders using multiple optimization approaches and loss functions and improve their performance by altering hyperparameters. Overall, autoencoders are a valuable tool with the potential to revolutionize the way we process and analyze complex data.

**Key Takeaways:**

- Autoencoders are neural networks that encode input data into a latent space representation before decoding it to recreate the original input.
- Using them to reduce dimensionality, extract features, compress data, and detect anomalies, among other things.
- Autoencoders have advantages such as learning useful features, being applicable to various data types, and working with unsupervised data.
- Lastly, autoencoders offer a versatile collection of methods for extracting meaningful information from data and can be a beneficial addition to a data scientist’s arsenal.

**The media shown in this article is not owned by Analytics Vidhya and is used at the Author’s discretion.**